|
|
Número de pieza | DF19L-20S-1SD | |
Descripción | 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire/ FPC or Fine Coaxial Cable | |
Fabricantes | Hirose Electric | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DF19L-20S-1SD (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! NEW
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications
Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
DF19 Series
Drawing of mated connectors
on a DF19G - *P-1H board
,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
For connection
of cables
For connection
of FPC
For connection of
fine coaxial cables
On-board type
Offset type
Reverse offset type
Drawing of mated connectors
on a DF19K- *P-1H board
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
sFeatures
1. Ultra Low Profile
FPC type: Max. 1.7 mm thick
Discrete Wire & Coaxial 1.5 mm thick
2. SMT HEADERS Suit all Sockets
Each header can connect to three different sockets (cable, FPC,
and fine coaxial cable type.
(Note: Fine coaxial cable type is under development.)
3. Standardised Outer Dimensions
The three sockets have the same outside dimensions to allow
complete Flexibility.
4. Many Variations
There are headers of the on-board, offset, and reverse offset types
to accommodate all designs.
5. Connection to a Metal GROUND Plate
Ground lines can be connected to a metal shell for shielding.
sApplication
LCDs, notebook personal computers, small OA machines, and small consumer products
Drawing of mated connectors
on a DF19L- *P-1H board
,,,,,,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Drawing of mated connectors
on a DF19KR- *P-1H board
,,,,,,,,,,,,,
,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2000.5
1
1 page sRight Angle Pin Header (SMT)
(Offset Type)
Assembled Header
BRecommended PCB Layout
Product No.
DF19K-20P-1H (* *)
DF19K-30P-1H (* *)
Specification No.* *, (* *)
(59): Gold plating
Unit: mm
HRS No.
Number of poles A B C D E Width of emboss Remarks
CL685-0008-1-* *
CL685-0032-6-* *
20 23.55 19 26.55 24.15 25.15 44 1.0 mm from the
30 33.55 29 36.55 34.15 35.15 56 board
Product No.
DF19L-14P-1H (* *)
DF19L-20P-1H (* *)
DF19L-30P-1H (* *)
HRS No.
Number of poles A B C D E Width of emboss Remarks
CL685-0003-8-* *
CL685-0019-8-* *
CL685-0016-0-* *
14 17.55 13 20.55 18.15 19.15 44
20
23.55 19 26.55 24.15 25.15
44
1.1 mm from the
board
30 33.55 29 36.55 34.15 35.15 56
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
5
5 Page BSoldering Temperature Profile
1. Recommended temperature profile
(Note 1) The temperature profile can be applied twice with the normal temperature profile.
(Note 2) The temperature is measured at the connector lead.
2. Recommended manual soldering conditions
3. Recommended screen thickness
4. Warpage of board
5. Cleaning
6. Wiring
7. Precautions
Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less
0.15mm
Max. 0.03mm at the connector center with the connector ends as the reference.
See the separate “Guide to Hirose Nylon connectors.”
See the separate “Guide to Hirose Nylon connectors.”
s As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the “Crimping Condition Sheet” and “Crimping Standard Sheet.”
s Due to the ultra miniature design care needs to be taken when disconnecting to avoid
accidental damage.
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet DF19L-20S-1SD.PDF ] |
Número de pieza | Descripción | Fabricantes |
DF19L-20S-1SD | 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire/ FPC or Fine Coaxial Cable | Hirose Electric |
DF19L-20S-1SDGND | 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire/ FPC or Fine Coaxial Cable | Hirose Electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |