Datenblatt-pdf.com


DF19L-14P-1HGND Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer DF19L-14P-1HGND
Beschreibung 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire/ FPC or Fine Coaxial Cable
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 12 Seiten
DF19L-14P-1HGND Datasheet, Funktion
NEW
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications
Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
DF19 Series
Drawing of mated connectors
on a DF19G - *P-1H board
,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
For connection
of cables
For connection
of FPC
For connection of
fine coaxial cables
On-board type
Offset type
Reverse offset type
Drawing of mated connectors
on a DF19K- *P-1H board
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
sFeatures
1. Ultra Low Profile
FPC type: Max. 1.7 mm thick
Discrete Wire & Coaxial 1.5 mm thick
2. SMT HEADERS Suit all Sockets
Each header can connect to three different sockets (cable, FPC,
and fine coaxial cable type.
(Note: Fine coaxial cable type is under development.)
3. Standardised Outer Dimensions
The three sockets have the same outside dimensions to allow
complete Flexibility.
4. Many Variations
There are headers of the on-board, offset, and reverse offset types
to accommodate all designs.
5. Connection to a Metal GROUND Plate
Ground lines can be connected to a metal shell for shielding.
sApplication
LCDs, notebook personal computers, small OA machines, and small consumer products
Drawing of mated connectors
on a DF19L- *P-1H board
,,,,,,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Drawing of mated connectors
on a DF19KR- *P-1H board
,,,,,,,,,,,,,
,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2000.5
1






DF19L-14P-1HGND Datasheet, Funktion
sRight Angle Pin Header (SMT)
(Reverse Offset Type)
Assembled Header
sRecommended PCB Layout
Specification No.* *, (* *)
(59): Gold plating
Unit: mm
Product No.
HRS No.
Number of poles A B C D E Width of emboss Remarks
DF19KR-14P-1H (* *) CL685-0024-8-* *
DF19KR-20P-1H (* *) CL685-0023-5-* *
14 17.55 13 20.55 18.15 19.15 44 1.0 mm from the
20 23.55 19 26.55 24.15 25.15 44 board
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
6

6 Page









DF19L-14P-1HGND pdf, datenblatt
BAssembly Procedure for FPC Socket
,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,
,,,,
,,,,,,,,,,
,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Note1:The ground plate and the socket are sold separately.
Note2:Use the special tool for assembling.
Note3:To insert the ground plate, lift the FPC about 30° to make a space for insertion. Don’t apply excessive force (bending or
gouging, as the FPC copper foil (end of the cover film) will crack.
Note4:If the ground plate doesn’t enter the socket, don’t apply excessive force, but check whether it is parallel with the socket.
Note5:To protect the FPC, insert or pull out the connector in parallel with the engagement plane.
Note6:To protect the FPC, don’t apply excessive tension.
Note7:To bend the FPC, observe the allowable R and other conditions recommended by the manufacturer, and keep a distance
between the bending point and the socket as shown in the illustration below.
Note8:To assemble the FPC to the socket, use the recommended jigs and tools and be careful not to be injured by the
edge of the metallic part of the connector. Observe the instructions given in the manual for wiring jigs and tools.
The contents of this catalog are current as of May 2000 Contents are subject to change without notice for the purpose of improvements.
12

12 Page





SeitenGesamt 12 Seiten
PDF Download[ DF19L-14P-1HGND Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DF19L-14P-1HGND1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire/ FPC or Fine Coaxial CableHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche