Datenblatt-pdf.com


DF14-2628SCF Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer DF14-2628SCF
Beschreibung 1.25mm Pitch Super Low profile Crimping Connector
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 6 Seiten
DF14-2628SCF Datasheet, Funktion
1.25mm Pitch Super Low profile Crimping Connector
DF14 Series
sFeatures
1. Super Low Profile
This is a connector special for right angle which has pursued a low
profile on the board.
Board mounting height: 2.5mm
A signal can be fetched from the area where there is no board to
board space.
2. Correspond to Automatic Mounting
The header has the vacuum mount face which enables the vacuum
absorption and the automatic mounting by the embossed tape
packaging.In addition, the tube packaging can be selected.
3. Four Wall Type Without Friction to Board by Socket
The header has the box structure to prevent from being twisted and
has the perfect mis-insertion prevention method. Moreover the
header has the wall on the board side and doesn't have any trouble
resulted from the friction to board by socket.
In addition, the metal fitting is attached to prevent the solder peel.
Board Mounting Figure
sApplications
LCD, Note PC, Mobile Terminal Small business equipment, Video camera
1
B177






DF14-2628SCF Datasheet, Funktion
BPrecautions
1. Recommended Temperature Profile (SMT)
2. Recommended Manual Soldering Condition (SMT)
3. Recommended Screen Thickness (SMT)
4. Board Sled (SMT)
5. Cleaning Condition
6. Connection Condition
7. Cautions
Note 1.The soldering process is allowed up to twice under the same condition. However, the
interval between the first and second processes must be maintained at the room
temperature.
Note 1.The temperature indicates the board surface temperature on the connector lead area.
Manual soldering: 290ç for 2 seconds
0.15 to 0.2mm
Max 0.03mm at the connector center area, based on both connector edges
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
sBe careful to carry out the crimping operation according to the "Crimping Condition Sheet"
and "Crimping Quality Reference", because the crimping contact style is too small.
sBe careful for an excessive scoop insertion/extraction, which will cause damage to the
product.
B182

6 Page







SeitenGesamt 6 Seiten
PDF Download[ DF14-2628SCF Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DF14-2628SCF1.25mm Pitch Super Low profile Crimping ConnectorHirose Electric
Hirose Electric
DF14-2628SCFA1.25mm Pitch Super Low profile Crimping ConnectorHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche