DataSheet.es    


PDF DS36277 Data sheet ( Hoja de datos )

Número de pieza DS36277
Descripción Dominant Mode Multipoint Transceiver
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de DS36277 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! DS36277 Hoja de datos, Descripción, Manual

July 1998
DS36277
Dominant Mode Multipoint Transceiver
General Description
The DS36277 Dominant Mode Multipoint Transceiver is de-
signed for use on bi-directional differential busses. It is opti-
mal for use on Interfaces that utilize Society of Automotive
Engineers (SAE) J1708 Electrical Standard.
The device is similar to standard TIA/EIA-485 transceivers,
but differs in enabling scheme. The Driver’s Input is normally
externally tied LOW, thus providing only two states: Active
(LOW), or Disabled (OFF). When the driver is active, the
dominant mode is LOW, conversely, when the driver is dis-
abled, the bus is pulled HIGH by external bias resistors.
The receiver provides a FAILSAFE feature that guarantees a
known output state when the Interface is in the following con-
ditions: Floating Line, Idle Line (no active drivers), and Line
Fault Conditions (open or short). The receiver output is
HIGH for the following conditions: Open Inputs, Terminated
Inputs (50), or Shorted Inputs. FAILSAFE is a highly desir-
able feature when the transceivers are used with Asynchro-
nous Controllers such as UARTs.
Features
n FAILSAFE receiver, RO = HIGH for:
— OPEN inputs
— Terminated inputs
— SHORTED inputs
n Optimal for use in SAE J1708 Interfaces
n Compatible with popular interface standards:
— TIA/EIA-485 and TIA/EIA-422-A
— CCITT recommendation V.11
n Bi-directional transceiver
— Designed for multipoint transmission
n Wide bus common mode range
— (−7V to +12V)
n Available in plastic DIP and SOIC packages
Connection and Logic Diagram
Truth Tables
DS011384-1
Order Number DS36277TM or DS36277TN
See NS Package Number M08A or N08E
Driver
Inputs
DE DI
LL
LH
HX
Outputs
DO/RI
DO /RI
LH
HL
ZZ
Receiver
Inputs
RE DO/RI–DO /RI
L 0 mV
L −500 mV
L SHORTED
L OPEN
HX
Output
RO
H
L
H
H
Z
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS011384
www.national.com

1 page




DS36277 pdf
Parameter Measurement Information (Continued)
DS011384-6
FIGURE 5. Driver Differential Propagation Delays and Transition Times
DS011384-7
FIGURE 6. Driver Propagation Delay Test Circuit
DS011384-8
FIGURE 7. Driver Propagation Delays
S1 to DO for DI = 3V
S1 to DO for DI = 0V
DS011384-9
FIGURE 8. Driver TRl-STATE Test Circuit (tPZH, tPHZ)
5
www.national.com

5 Page





DS36277 arduino
Physical Dimensions inches (millimeters) unless otherwise noted
8-Lead Molded Package (SO)
Order Number DS36277TM
NS Package Number M08A
8-Lead Molded Dual-In-Line Package (N)
Order Number DS36277TN
NS Package Number N08E
11
www.national.com

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet DS36277.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DS36276FAILSAFE Multipoint TransceiverNational Semiconductor
National Semiconductor
DS36276DS36276 FAILSAFE Multipoint Transceiver (Rev. A)Texas Instruments
Texas Instruments
DS36276MFAILSAFE Multipoint TransceiverNational Semiconductor
National Semiconductor
DS36277Dominant Mode Multipoint TransceiverNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar