Datenblatt-pdf.com


DS26LS32CN Schematic ( PDF Datasheet ) - National Semiconductor

Teilenummer DS26LS32CN
Beschreibung Quad Differential Line Receivers
Hersteller National Semiconductor
Logo National Semiconductor Logo 




Gesamt 8 Seiten
DS26LS32CN Datasheet, Funktion
May 1999
DS26LS32AC/DS26LS32C/DS26LS32M/DS26LS33M
Quad Differential Line Receivers
General Description
The DS26LS32 and DS26LS32A are quad differential line re-
ceivers designed to meet the RS-422, RS-423 and Federal
Standards 1020 and 1030 for balanced and unbalanced digi-
tal data transmission.
The DS26LS32 and DS26LS32A have an input sensitivity of
200 mV over the input voltage range of ±7V and the
DS26LS33 have an input sensitivity of 500 mV over the input
voltage range of ±15V.
The DS26LS32A differ in function from the popular
DS26LS32 and DS26LS33 in that input pull-up and
pull-down resistors are included which prevent output oscil-
lation on unused channels.
Each version provides an enable and disable function com-
mon to all four receivers and features TRI-STATE ® outputs
with 8 mA sink capability. Constructed using low power
Schottky processing, these devices are available over the
full military and commerical operating temperature ranges.
Features
n High differential or common-mode input voltage ranges
of ±7V on the DS26LS32 and DS26LS32A and ±15V
on the DS26LS33
n ±0.2V sensitivity over the input voltage range on the
DS26LS32 and DS26LS32A, ±0.5V sensitivity on the
DS26LS33
n DS26LS32 and DS26LS32A meet all requirements of
RS-422 and RS-423
n 6k minimum input impedance
n 100 mV input hysteresis on the DS26LS32 and
DS26LS32A, 200 mV on the DS26LS33
n Operation from a single 5V supply
n TRI-STATE outputs, with choice of complementary
output enables for receiving directly onto a data bus
Logic Diagram
DS005255-1
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS005255
www.national.com






DS26LS32CN Datasheet, Funktion
Physical Dimensions inches (millimeters) unless otherwise noted
Ceramic Dual-In-Line Package (J)
Order Number DS26LS32MJ/883 or DS26LS33MJ/883
NS Package Number J16A
Small Outline Package (M)
Order Number DS26LS32CM or DS26LS32ACM
NS Package Number M16A
www.national.com
6

6 Page







SeitenGesamt 8 Seiten
PDF Download[ DS26LS32CN Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DS26LS32CQuad Differential Line ReceiversNational Semiconductor
National Semiconductor
DS26LS32CDS26LS32AC/DS26LS32C/DS26LS32M/DS26LS33M Quad Differential Line Receivers (Rev. C)Texas Instruments
Texas Instruments
DS26LS32CMQuad Differential Line ReceiversNational Semiconductor
National Semiconductor
DS26LS32CNQuad Differential Line ReceiversNational Semiconductor
National Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche