Datenblatt-pdf.com


DAC488HR Schematic ( PDF Datasheet ) - ETC

Teilenummer DAC488HR
Beschreibung 16-bit D/A Converter with Digital I/O & IEEE 488
Hersteller ETC
Logo ETC Logo 




Gesamt 4 Seiten
DAC488HR Datasheet, Funktion
®
the smart approach to instrumentation
DAC488HR
16-bit D/A Converter with Digital I/O & IEEE 488
Features
Two or four isolated 16-bit outputs
100-kHz/channel update rate
480 Ksamples/channel max buffer
±1, ±2, ±5, & ±10 VFS programmable
unipolar & bi-polar output ranges
One-shot, step, burst, waveform, &
continuous output modes
GET, external TTL, IEEE command,
& time event trigger sources
ASCII, binary, integer decimal, & hexa-
decimal data formats
Standard sine, square, & triangle
waveform generation
500 VDC channel-to-channel isolation
Eight digital inputs & eight digital
outputs
100 mA high-current outputs
LabVIEW® drivers
The DAC488HRis an IEEE 488 program-
mable 16-bit D/A converter. It can be
configured with either two or four output
channels, which are optically isolated from
each other and from IEEE 488 common
by up to 500 VDC. Each channel is inde-
pendently programmable for 1, 2, 5, or 10
VFS unipolar or bipolar output, specified
as either bits or volts in ASCII, integer,
hexadecimal, or binary format. Multiple
output modes, multiple clock and trigger
sources, and buffer management enable
the DAC488HR to function as a precision
voltage source, a function generator, or
an arbitrary waveform generator.
The versatile DAC488HR functions as a voltage source, function generator, and an arbitrary
waveform generator
IEEE 488
controller
Up to 13 IEEE 488 devices
SCSI488/S
DAC488HR/2
Filter488
IEEE
DAC488HR
DAC488HR
+- +- +- +-
CH1 CH2 CH3 CH4
8 digital
outputs
2- or 4-channel 16-bit,
isolated 100-kHz
analog outputs
8 digital
inputs
Trigger Modes
The DAC488HR’s five trigger modes sup-
port a wide variety of applications.
Burst Mode. Functionally identical to step
mode, except that waveforms rather than
single values are output.
Waveforms captured by IOtech’s 16-bit,
100-kHz ADC488A series (see p. 243) digi-
tizers can be edited and transferred to the
DAC488HR for output. The ADC488A
series and DAC488HR in combination
form a powerful waveform I/O system.
Typical applications include transducer
simulation, disk drive testing, vibration
analysis, and materials testing.
BusControlMode. Eachportisprogrammed
to output a specified value under direct
control from the IEEE 488 bus. This mode is
useful for maintaining an initial value until
a specified condition occurs.
Step Mode. When a specified trigger is
detected, a value is output from the
buffer, and the DAC488HR is automati-
cally re-armed until the specified buffer
count is reached. The last specified buffer
value is held as the output.
Waveform Mode. Based on recognition
of a trigger, the waveform buffer is output
for a specified number of cycles.
Continuous Mode. Data is continuously
input from the IEEE 488 bus and output to
an analog channel at rates up to 200 Kbytes/s
upon the detection of a specified trigger.
This mode is ideally suited for audio, speech,
and other applications that require long
duration waveforms.
tel: 440-439-4091 fax: 440-439-4093
QUICK FIND
248
[email protected] www.iotech.com





SeitenGesamt 4 Seiten
PDF Download[ DAC488HR Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
DAC488HR16-bit D/A Converter with Digital I/O & IEEE 488ETC
ETC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche