|
|
Teilenummer | D374-10F |
|
Beschreibung | D374-Type Digital Uncooled 2.5 Gbits/s Laser Module | |
Hersteller | Agere Systems | |
Logo | ||
Gesamt 8 Seiten Data Sheet
December 2000
D374-Type Digital Uncooled 2.5 Gbits/s
Laser Module
Applications
s Short-reach SONET OC-48 systems
s SDH STM-16 systems
s Telecommunications
s Secure digital data systems
The low-profile D374-Type Laser Module is ideally suited for
short- and long-reach SONET and other high-speed digital
applications.
Features
s 2.5 Gbits/s operation
s Eight-pin package suitable for SONET/SDH appli-
cations
s MQW F-P 1.3 µm laser with single-mode fiber pig-
tail
s Wide operating temperature range:
–40 °C to +85 °C
s No TEC required
s 25 Ω input impedance
s High output power: typically 1.0 mW peak power
coupled into single-mode fiber; 0.2 mW versions
available
s Hermetically sealed active components
s Internal back-facet monitor
s Qualification program: Telcordia Technologies * TA-
983
Benefits
s Easily board mounted
s Gull wing leads
s No additional heat sinks required
Description
The D374-Type Uncooled Laser Module consists of a
laser diode coupled to a single-mode fiber pigtail.
The device is available in a standard, 8-pin configu-
ration (see Figure 1 and/or Table 1) and is ideal for
short-reach and other high-speed digital applica-
tions. It is developed specifically for 2.5 Gbits/s appli-
cations.
The module includes a multiquantum-well Fabry-
Perot (MQW F-P) laser and an InGaAs PIN photo-
diode back-facet monitor in an epoxy-free, hermeti-
cally sealed package.
* Telcordia Technologies is a registered trademark of Telcordia
Technologies, Inc.
D374-Type Digital Uncooled 2.5 Gbits/s Laser Module
Data Sheet
December 2000
Laser Safety Information
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are Class 3B laser products per IEC * 60825-1:1993. The device has been classi-
fied with the FDA under accession number 8720010.
This product complies with 21 CFR 1040.10 and 1040.11.
8.3 µm single-mode pigtail with optional connector.
Wavelength = 1.3 µm.
Maximum power = 10 mW.
Because of size constraints, laser safety labeling is not affixed to the module but attached to the outside of the
shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
Class 3B Laser Product IEC-60825M 1993 Max. Output: 10 mW Wavelength: 1.3 µm
* IEC is a registered trademark of The International Electrotechnical Commission.
6
Agere Systems Inc.
6 Page | ||
Seiten | Gesamt 8 Seiten | |
PDF Download | [ D374-10F Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
D374-10A | D374-Type Digital Uncooled 2.5 Gbits/s Laser Module | Agere Systems |
D374-10F | D374-Type Digital Uncooled 2.5 Gbits/s Laser Module | Agere Systems |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |