Datenblatt-pdf.com


D2525P Schematic ( PDF Datasheet ) - Agere Systems

Teilenummer D2525P
Beschreibung Wavelength-Selected D2525P Isolated DFB Laser Module with PMF
Hersteller Agere Systems
Logo Agere Systems Logo 




Gesamt 10 Seiten
D2525P Datasheet, Funktion
Data Sheet
March 2000
Wavelength-Selected D2525P
Isolated DFB Laser Module with PMF
Applications
s Telecommunications
— SONET/SDH OC-48/STM-16, OC-192/STM-64
— Extended and ultralong reach
— Undersea systems
— Dense WDM systems
s Digital video
The 1.5 µm D2525P Laser Module is available in a 14-pin, her-
metic, butterfly package.
Features
s ITU wavelengths available from
1529.55 nm —1610.06 nm
s Integrated optical isolator
s High-performance, multiquantum-well (MQW),
distributed-feedback (DFB) laser
s Industry-standard, 14-pin butterfly package
s Hermetic package
s InGaAs, PIN photodetector back-facet monitor
s Polarization-maintaining fiber pigtail
s For use with lithium niobate modulators
s High reliability
s Narrow linewidth
s High optical power available
Description
The D2525P family of DFB laser modules is
designed to be used with a lithium niobate external
modulator (see Table 4). The laser module features a
polarization-maintaining fiber (PMF) pigtail, enabling
it to be directly connected to a modulator without the
need of a polarization controller. The PMF maintains
the polarization of the output light to a consistent ori-
entation. This allows the D2525P to be used as a CW
light source for systems requiring extremely low chirp
such as undersea or 10 Gbits/s systems. The module
contains a multiquantum-well (MQW), distributed-
feedback (DFB) laser. This device nominally has an
output power of 10 mW. The wavelength of the laser
can be temperature-tuned for more precise wave-
length selection by adjusting the temperature of the
internal thermoelectric cooler.






D2525P Datasheet, Funktion
Wavelength-Selected D2525P
Isolated DFB Laser Module with PMF
Data Sheet
March 2000
High-Power Product
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are Class IIIb laser products per IEC* 60825-1:1993. The device has been certi-
fied with the FDA under accession number 8720010.
This product complies with 21 CFR 1040.10 and 1040.11.
8 µm/123 µm—128 µm single-mode fiber with 900 µm loose-tube jacketed fiber and connector
Wavelength = 1.5 µm
Maximum power = 40 mW
Because of size constraints, laser safety labeling is not affixed to the module but attached to the outside of the
shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
* IEC is a registered trademark of The International Electrotechnical Commission.
40 mW
1.5 µm
6 Lucent Technologies Inc.

6 Page







SeitenGesamt 10 Seiten
PDF Download[ D2525P Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
D2525Silicon NPN Triple Diffused Type TransistorToshiba
Toshiba
D2525PWavelength-Selected D2525P Isolated DFB Laser Module with PMFAgere Systems
Agere Systems
D2525P40Wavelength-Selected D2525P Isolated DFB Laser Module with PMFAgere Systems
Agere Systems
D2525P41Wavelength-Selected D2525P Isolated DFB Laser Module with PMFAgere Systems
Agere Systems
D2525P42Wavelength-Selected D2525P Isolated DFB Laser Module with PMFAgere Systems
Agere Systems

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche