|
|
PDF ADG611 Data sheet ( Hoja de datos )
| Número de pieza | ADG611 | |
| Descripción | 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADG611 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
a 1 pC Charge Injection, 100 pA Leakage,
CMOS ؎5 V/+5 V/+3 V Quad SPST Switches
ADG611/ADG612/ADG613
FEATURES
1 pC Charge Injection
؎2.7 V to ؎5.5 V Dual Supply
+2.7 V to +5.5 V Single Supply
Automotive Temperature Range –40؇C to +125؇C
100 pA Max @ 25؇C Leakage Currents
85 ⍀ On-Resistance
Rail-to-Rail Switching Operation
Fast Switching Times
16-Lead TSSOP Packages
Typical Power Consumption (<0.1 W)
TTL/CMOS-Compatible Inputs
APPLICATIONS
Automatic Test Equipment
Data Acquisition Systems
Battery-Powered Systems
Communication Systems
Sample and Hold Systems
Audio Signal Routing
Relay Replacement
Avionics
FUNCTIONAL BLOCK DIAGRAMS
ADG611
S1
ADG612
S1
ADG613
S1
IN1 IN1 IN1
D1 D1 D1
S2 S2 S2
IN2 IN2 IN2
D2 D2 D2
S3 S3 S3
IN3 IN3 IN3
D3 D3 D3
S4 S4 S4
IN4 IN4 IN4
D4 D4 D4
SWITCHES SHOWN FOR A LOGIC “1” INPUT
GENERAL DESCRIPTION
The ADG611, ADG612, and ADG613 are monolithic CMOS
devices containing four independently selectable switches. These
switches offer ultralow charge injection of 1 pC over full input
signal range and typical leakage currents of 10 pA at 25°C.
They are fully specified for ± 5 V, +5 V, and +3 V supplies.
They contain four independent single-pole/single-throw (SPST)
switches. The ADG611 and ADG612 differ only in that the
digital control logic is inverted. The ADG611 switches are turned
on with a logic low on the appropriate control input, while a logic
high is required to turn on the switches of the ADG612. The
ADG613 contains two switches whose digital control logic is
similar to the ADG611, while the logic is inverted on the other
two switches.
Each switch conducts equally well in both directions when ON
and has an input signal range that extends to the supplies. The
ADG613 exhibits break-before-make switching action. The
ADG611/ADG612/ADG613 are available in small 16-lead
TSSOP packages.
PRODUCT HIGHLIGHTS
1. Ultralow Charge Injection (1 pC typically)
2. Dual ± 2.7 V to ± 5.5 V or Single +2.7 V to +5.5 V
Operation.
3. Automotive Temperature Range, –40°C to +125°C
4. Small 16-lead TSSOP package.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002
1 page  
ADG611/ADG612/ADG613
ABSOLUTE MAXIMUM RATINGS1
(TA = 25°C unless otherwise noted)
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 V
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6.5 V
VSS to GND . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –6.5 V
Analog Inputs2 . . . . . . . . . . . . . . . VSS – 0.3 V to VDD + 0.3 V
Digital Inputs2 . . . . . . . . . . . . . GND – 0.3 V to VDD + 0.3 V
or 30 mA, Whichever Occurs First
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
(Pulsed at 1 ms, 10% Duty Cycle max)
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 10 mA
3 V operation 85°C to 125°C . . . . . . . . . . . . . . . . . 7.5 mA
Operating Temperature Range
Automotive (Y Version) . . . . . . . . . . . . . . –40°C to +125°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
16-Lead TSSOP, θJA Thermal Impedance . . . . . . . 150.4°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. Only one absolute
maximum rating may be applied at any one time.
2Overvoltages at IN, S, or D will be clamped by internal diodes. Current should be
limited to the maximum ratings given.
Model
ADG611YRU
ADG612YRU
ADG613YRU
Temperature Range
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
ORDERING GUIDE
Package Description
Thin Shrink Small Outline Package (TSSOP)
Thin Shrink Small Outline Package (TSSOP)
Thin Shrink Small Outline Package (TSSOP)
Package Option
RU-16
RU-16
RU-16
Table I. ADG611/ADG612 Truth Table
ADG611 In
0
1
ADG612 In
1
0
Switch Condition
ON
OFF
Logic
0
1
Table II. ADG613 Truth Table
Switch 1, 4
OFF
ON
Switch 2, 3
ON
OFF
PIN CONFIGURATIONS
IN1 1
16 IN2
D1 2 ADG611 15 D2
S1 3 ADG612 14 S2
VSS 4 ADG613 13 VDD
TOP VIEW
GND 5 (Not to Scale) 12 NC
S4 6
11 S3
D4 7
10 D3
IN4 8
9 IN3
NC = NO CONNECT
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADG611/ADG612/ADG613 features proprietary ESD protection circuitry, permanent dam-
age may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–5–
5 Page 
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
ADG611/ADG612/ADG613
16-Lead TSSOP
(RU-16)
0.201 (5.10)
0.193 (4.90)
16
1
PIN 1
0.006 (0.15)
0.002 (0.05)
9
0.177 (4.50)
0.169 (4.30)
0.256 (6.50)
0.246 (6.25)
8
0.0433 (1.10)
MAX
8؇
0.0256 (0.65)
SEATING
PLANE
BSC
0.0118 (0.30)
0.0075 (0.19)
0.0079 (0.20) 0؇
0.0035 (0.090)
0.028 (0.70)
0.020 (0.50)
REV. 0
–11–
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ADG611.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADG611 | 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches | Analog Devices |
| ADG612 | 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches | Analog Devices |
| ADG613 | 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches | Analog Devices |
| ADG619 | CMOS +-5 V/ +5V 4 OHM SINGLE SPDT SWITCHES | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |