|
|
PDF ADG602 Data sheet ( Hoja de datos )
| Número de pieza | ADG602 | |
| Descripción | SPST Switches | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADG602 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Data Sheet
FEATURES
Low on resistance, 2.5 Ω maximum
<0.65 Ω on-resistance flatness
Dual ±2.7 V to ±5.5 V or single +2.7 V to +5.5 V supplies
Rail-to-rail input signal range
Tiny, 6-lead SOT-23; 8-lead MSOP; and 820 μm × 2255 μm die
Low power consumption
TTL-/CMOS-compatible inputs
APPLICATIONS
Automatic test equipment
Power routing
Communication systems
Data acquisition systems
Sample-and-hold systems
Avionics
Relay replacement
Battery-powered systems
GENERAL DESCRIPTION
The ADG601/ADG602 are monolithic, CMOS single-pole
single-throw (SPST) switches with on resistance typically less
than 2.5 Ω. The low on-resistance flatness makes the ADG601/
ADG602 ideally suited to many applications, particularly those
requiring low distortion. These switches are ideal replacements
for mechanical relays because they are more reliable, have lower
power requirements, and are available in much smaller package
sizes.
The ADG601 is a normally open (NO) switch, and the ADG602
is a normally closed (NC) switch. Each switch conducts equally
well in both directions when the device is on, with the input signal
range extending to the supply rails.
The switches are available in tiny, 6-lead SOT-23; 8-lead MSOP;
and 820 μm × 2255 μm die.
2 Ω, CMOS, ±5 V/+5 V
SPST Switches
ADG601/ADG602
FUNCTIONAL BLOCK DIAGRAMS
S DS D
IN
ADG601
ADG602
NOTES
1. SWITCHES SHOWN FOR A LOGIC 0 INPUT.
Figure 1.
IN
Table 1. Truth Table
ADG601 IN
ADG602 IN
01
10
Switch Condition
Off
On
PRODUCT HIGHLIGHTS
1. Low on resistance (2 Ω typical)
2. Dual ±2.7 V to ±5.5 V or single +2.7 V to +5.5 V supplies
3. Tiny, 6-lead SOT-23; 8-lead MSOP; and 820 μm × 2255 μm die
4. Rail-to-rail input signal range
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2001–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page  
Data Sheet
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs1
Digital Inputs1
Continuous Current, S or D
Peak Current, S or D
(Pulsed at 1 ms, 10% Duty Cycle Max)
Operating Temperature Range
Industrial (B Version)
Storage Temperature Range
Junction Temperature
Thermal Resistance
MSOP
θJA
θJC
SOT-23
θJA
θJC
Lead Temperature, Soldering (10 sec)
IR Reflow, Peak Temperature
Rating
13 V
−0.3 V to +6.5 V
+0.3 V to –6.5 V
VSS − 0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V or
30 mA (whichever
occurs first)
100 mA
200 mA
−40°C to +85°C
−65°C to +150°C
150°C
206°C/W
44°C/W
229.6°C/W
91.99°C/W
300°C
260°C
1 Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
ADG601/ADG602
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Only one absolute maximum rating may be applied at a time.
ESD CAUTION
Rev. D | Page 5 of 12
5 Page 
Data Sheet
OUTLINE DIMENSIONS
3.20
3.00
2.80
3.20
3.00
2.80
PIN 1
IDENTIFIER
85
14
0.65 BSC
5.15
4.90
4.65
0.95
0.85
0.75
0.15
0.05
COPLANARITY
0.10
1.10 MAX
15° MAX
0.40
0.25
6° 0.23
0° 0.09
0.80
0.55
0.40
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 22. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
3.00
2.90
2.80
1.70
1.60
1.50
PIN 1
INDICATOR
1.30
1.15
0.90
0.15 MAX
0.05 MIN
654
123
3.00
2.80
2.60
1.90
BSC
0.95 BSC
1.45 MAX
0.95 MIN
0.20 MAX
0.08 MIN
0.50 MAX
0.30 MIN
SEATING
PLANE
10°
4°
0°
0.60
BSC
COMPLIANT TO JEDEC STANDARDS MO-178-AB
Figure 23. 6-Lead Small Outline Transistor Package [SOT-23]
(RJ-6)
Dimensions shown in millimeters
0.55
0.45
0.35
ADG601/ADG602
Rev. D | Page 11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ADG602.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADG601 | SPST Switches | Analog Devices |
| ADG602 | SPST Switches | Analog Devices |
| ADG604 | 1 pC Charge Injection/ 100 pA Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer | Analog Devices |
| ADG608 | 3 V/5 V/ 4/8 Channel High Performance Analog Multiplexers | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |