Datenblatt-pdf.com


A3240UA Schematic ( PDF Datasheet ) - Allegro MicroSystems

Teilenummer A3240UA
Beschreibung CHOPPER-STABILIZED/ PRECISION HALL-EFFECT SWITCH
Hersteller Allegro MicroSystems
Logo Allegro MicroSystems Logo 




Gesamt 12 Seiten
A3240UA Datasheet, Funktion
3240
CHOPPER-STABILIZED, PRECISION
HALL-EFFECT SWITCH
Suffix ‘–LT’ & ‘–UA’ Pinning
PTCT
V
CC
12
3
Dwg. PH-003-2
Pinning is shown viewed from branded side.
The A3240-- Hall-effect switch is an extremely temperature-stable
and stress-resistant sensor especially suited for operation over extended
temperature ranges to +150°C. Superior high-temperature performance
is made possible through dynamic offset cancellation, which reduces the
residual offset voltage normally caused by device overmolding, tempera-
ture dependencies, and thermal stress.
The device includes on a single silicon chip a voltage regulator,
Hall-voltage generator, small-signal amplifier, chopper stabilization,
Schmitt trigger, and a short-circuit protected open-collector output to
sink up to 25 mA. A south pole of sufficient strength will turn the output
ON. An on-board regulator permits operation with supply voltages of
4.2 to 24 volts.
The first character of the part number suffix determines the device
operating temperature range; suffix ‘E–’ is for -40°C to +85°C and
‘L–’ is -40°C to +150°C. Three package styles provide a magnetically
optimized package for most applications. Suffix ‘–LH’ is a modified
SOT-23 surface-mount package, ‘–LT’ is a miniature SOT-89/TO-
243AA transistor package for surface-mount applications; while suffix
‘–UA’ is a three-lead ultra-mini-SIP for through-hole mounting.
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Supply Voltage, VCC ........................ 26.5 V
Reverse Battery Voltage, VRCC .......... -30 V
Magnetic Flux Density, B ........... Unlimited
Output OFF Voltage, VOUT ................. 26 V
Continuous Output Current,
IOUT ....................... Internally Limited
Reverse Output Current, IOUT ........ -50 mA
Package Power Dissipation, PD . See Graph
Junction Temperature, TJ ............... +170°C
Operating Temperature Range, TA
Suffix ‘E–’ .................. -40°C to +85°C
Suffix ‘L–’ ................ -40°C to +150°C
Storage Temperature Range,
TS .............................. -65°C to +170°C
FEATURES
I Resistant to Physical Stress
I Superior Temperature Stability
I Output Short-Circuit Protection
I Operation From Unregulated Supply
I Reverse Battery Protection
I Solid-State Reliability
I Small Size
Always order by complete part number: the prefix ‘A’ + the basic four-
digit part number + a suffix to indicate operating temperature range +
a suffix to indicate package style, e.g., A3240ELH .






A3240UA Datasheet, Funktion
3240
CHOPPER-STABILIZED,
PRECISION
HALL-EFFECT SWITCH
SENSOR LOCATIONS
(±0.005" [0.13 mm] die placement)
Package Designator ‘LH’
ACTIVE AREA DEPTH
0.011"
0.28 mm
NOM
A
1
0.059"
1.49 mm
3
0.038"
0.96 mm
2
Dwg. MH-025
Package Designator ‘LT’
ACTIVE AREA DEPTH
0.030"
0.76 mm
NOM
A
0.088"
2.24 mm
0.045"
1.14 mm
12
3
Dwg. MH-008-8
Package Designators ‘UA’ and ‘UA-TL’
ACTIVE AREA DEPTH
0.018"
0.46 mm
NOM
A
BRANDED
SURFACE
1
0.080"
2.04 mm
0.056"
1.44 mm
23
Dwg. MH-011-9A
Although sensor location is accurate to three sigma for a
particular design, product improvements may result in small
changes to sensor location.
Allegro
115 Northeast Cutoff, Box 15036
6 Worcester, Massachusetts 01615-0036 (508) 853-5000

6 Page









A3240UA pdf, datenblatt
3240
CHOPPER-STABILIZED,
PRECISION
HALL-EFFECT SWITCH
The products described herein are manufactured under one or
more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsi-
bility for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
115 Northeast Cutoff, Box 15036
12 Worcester, Massachusetts 01615-0036 (508) 853-5000

12 Page





SeitenGesamt 12 Seiten
PDF Download[ A3240UA Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
A3240UACHOPPER-STABILIZED/ PRECISION HALL-EFFECT SWITCHAllegro MicroSystems
Allegro MicroSystems
A3240UA-TLCHOPPER-STABILIZED/ PRECISION HALL-EFFECT SWITCHAllegro MicroSystems
Allegro MicroSystems

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche