Datenblatt-pdf.com


ACTS374K Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer ACTS374K
Beschreibung Radiation Hardened Octal D Flip-Flop/ Three-State
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 10 Seiten
ACTS374K Datasheet, Funktion
ACTS374MS
April 1995
Radiation Hardened
Octal D Flip-Flop, Three-State
Features
• 1.25 Micron Radiation Hardened SOS CMOS
• Total Dose 300K RAD (Si)
• Single Event Upset (SEU) Immunity
<1 x 10-10 Errors/Bit-Day (Typ)
• SEU LET Threshold >80 MEV-cm2/mg
• Dose Rate Upset >1011 RAD (Si)/s, 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55oC to +125oC
• Significant Power Reduction Compared to ALSTTL Logic
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.8V Max
- VIH = VCC/2V Min
• Input Current 1µA at VOL, VOH
Description
The Intersil ATCS374MS is a radiation hardened octal D-type
flip-flop with three-state outputs. The eight edge-triggered flip-
flops enter data into their registers on the low to high transition of
clock (CP). The Output Enable (OEN) controls the three-state
outputs and is independent of the register operation. When OEN
is high, the outputs will be in the high impedance state.
The ACTS374MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of the
radiation hardened, high-speed, CMOS/SOS Logic Family.
Pinouts
20 LEAD CERAMIC DUAL-IN-LINE
MIL-STD-1835 DESIGNATOR CDIP2-T20, LEAD FINISH C
TOP VIEW
OE 1
Q0 2
D0 3
D1 4
Q1 5
Q2 6
D2 7
D3 8
Q3 9
GND 10
20 VCC
19 Q7
18 D7
17 D6
16 Q6
15 Q5
14 D5
13 D4
12 Q4
11 CP
20 LEAD CERAMIC FLATPACK
MIL-STD-1835 DESIGNATOR CDFP4-F20, LEAD FINISH C
TOP VIEW
OE
Q0
D0
D1
Q1
Q2
D2
D3
Q3
GND
1 20
2 19
3 18
4 17
5 16
6 15
7 14
8 13
9 12
10 11
VCC
Q7
D7
D6
Q6
Q5
D5
D4
Q4
CP
Ordering Information
PART NUMBER
ACTS374DMSR
ACTS374KMSR
ACTS374D/Sample
ACTS374K/Sample
ACTS374HMSR
TEMPERATURE RANGE
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
+25oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
20 Lead SBDIP
20 Lead Ceramic Flatpack
20 Lead SBDIP
20 Lead Ceramic Flatpack
Die
Truth Table
INPUTS
OUTPUTS
OE
L
L
L
H
H = High Level
L = Low Level
X = Immaterial
Q0
Z = High Impedance
CP Dn Qn
HH
LL
X X Q0
XXZ
= Transition from Low to High Level
= the level of Q before the indicated input conditions
were established
Functional Diagram
1 OF 8
FF
D DQ
CP
COMMON CONTROLS
CP
OE
Q
OE
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 518828
File Number 3998






ACTS374K Datasheet, Funktion
ACTS374MS
Intersil - Space Products MS Screening
Wafer Lot Acceptance (All Lots) Method 5007 (Includes SEM)
Radiation Verification (Each Wafer) Method 1019,
4 Samples/Wafer, 0 Rejects
100% Nondestructive Bond Pull Method 2023
100% Internal Visual Inspection Method 2010
100% Temperature Cycling Method 1010 Condition C
(-65o to +150oC)
100% Constant Acceleration
100% PIND Testing
100% External Visual Inspection
100% Serialization
100% Initial Electrical Test
100% Static Burn-In 1 Method 1015, 24 Hours at +125oC Min
100% Interim Electrical Test 1 (Note 1)
100% Static Burn-In 2 Method 1015, 24 Hours at +125oC Min
100% Interim Electrical Test 2 (Note 1)
100% Dynamic Burn-In Method 1015, 240 Hours at +125oC
or 180 Hours at +135oC
100% Interim Electrical Test 3 (Note 1)
100% Final Electrical Test
100% Fine and Gross Seal Method 1014
100% Radiographics Method 2012 (2 Views)
100% External Visual Method 2009
Group A (All Tests) Method 5005 (Class S)
Group B (Optional) Method 5005 (Class S) (Note 2)
Group D (Optional) Method 5005 (Class S) (Note 2)
CSI and/or GSI (Optional) (Note 2)
Data Package Generation (Note 3)
NOTES:
1. Failures from interim electrical tests 1 and 2 are combined for determining PDA (PDA = 5% for subgroups 1, 7, 9 and delta failures com-
bined, PDA = 3% for subgroup 7 failures). Interim electrical tests 3 PDA (PDA = 5% for subgroups 1, 7, 9 and delta failures combined,
PDA = 3% for subgroup 7 failures).
2. These steps are optional, and should be listed on the purchase order if required.
3. Data Package Contents:
Cover Sheet (P.O. Number, Customer Number, Lot Date Code, Intersil Number, Lot Number, Quantity).
Certificate of Conformance (as found on shipper).
Lot Serial Number Sheet (Good Unit(s) Serial Number and Lot Number).
Variables Data (All Read, Record, and delta operations).
Group A Attributes Data Summary.
Wafer Lot Acceptance Report (Method 5007) to include reproductions of SEM photos. NOTE: SEM photos to include percent of step coverage.
X-Ray Report and Film, including penetrometer measurements.
GAMMA Radiation Report with initial shipment of devices from the same wafer lot; containing a Cover Page, Disposition, RAD Dose,
Lot Number, Test Package, Spec Number(s), Test Equipment, etc. Irradiation Read and Record data will be on file at Intersil.
Propagation Delay Timing Diagram and Load Circuit
VIH
VSS
VOH
VOL
VS INPUT
TPLH
VS
TPHL
OUTPUT
DUT
CL
50pF
TEST
POINT
RL
500
AC VOLTAGE LEVELS
PARAMETER
ACS
VCC
4.50
VIH 3.00
VS 1.30
VIL 0
GND
0
UNITS
V
V
V
V
V
Spec Number 518828
6

6 Page







SeitenGesamt 10 Seiten
PDF Download[ ACTS374K Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ACTS374DRadiation Hardened Octal D Flip-Flop/ Three-StateIntersil Corporation
Intersil Corporation
ACTS374DMSRRadiation Hardened Octal D Flip-Flop/ Three-StateIntersil Corporation
Intersil Corporation
ACTS374HMSRRadiation Hardened Octal D Flip-Flop/ Three-StateIntersil Corporation
Intersil Corporation
ACTS374KRadiation Hardened Octal D Flip-Flop/ Three-StateIntersil Corporation
Intersil Corporation
ACTS374KMSRRadiation Hardened Octal D Flip-Flop/ Three-StateIntersil Corporation
Intersil Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche