DataSheet.es    


PDF AD7671 Data sheet ( Hoja de datos )

Número de pieza AD7671
Descripción 16-Bit 1 MSPS SAR Unipolar ADC with Ref
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo



Hay una vista previa y un enlace de descarga de AD7671 (archivo pdf) en la parte inferior de esta página.


Total 23 Páginas

No Preview Available ! AD7671 Hoja de datos, Descripción, Manual

PRELIMINARY TECHNICAL DATA
a 16-Bit 1 MSPS SAR Unipolar ADC with Ref
Preliminary Technical Data
AD7667*
FEATURES
Throughput:
1 MSPS (Warp Mode)
800 kSPS (Normal Mode)
INL: ±2.5 LSB Max (±0.0038% of Full Scale)
16 Bits Resolution with No Missing Codes
Analog Input Voltage Range: 0 V to 2.5 V
No Pipeline Delay
Parallel and Serial 5 V/3 V Interface
SPITM/QSPITM/MICROWIRETM/DSP Compatible
Single 5 V Supply Operation
Power Dissipation
112 mW Typ without REF, 122 mW Typ with REF
15 W @ 100 SPS
Power-Down Mode: 7 W Max
Package: 48-Lead Quad Flat Pack (LQFP);
48-Lead Chip Scale Package (LFCSP);
Pin-to-Pin Compatible with PulSAR ADCs
APPLICATIONS
Data Acquisition
Instrumentation
Digital Signal Processing
Spectrum Analysis
Medical Instruments
Battery-Powered Systems
Process Control
FUNCTIONAL BLOCK DIAGRAM
AGND
AVDD
IN
INGND
PDREF
PDBUF
PD
RESET
REFBUFIN REF REFGND
2.5 V REF
AD7667
SWITCHED
CAP DAC
CLOCK
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
WARP IMPULSE CNVST
DVDD DGND
SERIAL
PORT
16
PARALLEL
INTERFACE
OVDD
OGND
DATA[15:0]
BUSY
RD
CS
SER/PAR
OB/2C
BYTESWAP
Type / kSPS
Pseudo
Differential
True Bipolar
True
Differential
PulSAR Selection
100 - 250
AD7651
AD7660/61
AD7663
AD7675
500 - 570
AD7650/52
AD7664/66
AD7665
AD7676
1000
AD7653
AD7667
AD7671
AD7677
GENERAL DESCRIPTION
The AD7667 is a 16-bit, 1 MSPS, charge redistribution SAR,
analog-to-digital converter that operates from a single 5 V
power supply. The part contains a high-speed 16-bit sampling
ADC, an internal conversion clock, internal reference, error
correction circuits, and both serial and parallel system inter-
face ports.
It features a very high sampling rate mode (Warp) and, for
asynchronous conversion rate applications, a fast mode
(Normal) and, for low power applications, a reduced power
mode (Impulse) where the power is scaled with the through-
put.
It is fabricated using Analog Devices’ high-performance, 0.6 micron
CMOS process, with correspondingly low cost and is available in a
48-lead LQFP and a tiny 48-lead LFCSP with operation speci-
fied from –40°C to +85°C.
*Patent pending.
SPI and QSPI are trademarks of Motorola Inc.
MICROWIRE ia a trademark of National Semiconductor Corporation
REV. PrA
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
PRODUCT HIGHLIGHTS
1. Fast Throughput
The AD7667 is a 1 MSPS, charge redistribution, 16-bit
SAR ADC with internal error correction circuitry.
2. Internal Reference
The AD7667 has an internal reference and allows for an
external reference to be used.
3. Superior INL
The AD7667 has a maximum integral nonlinearity of 2.5
LSB with no missing 16-bit code.
4. Single-Supply Operation
The AD7667 operates from a single 5 V supply and dissipates
a typical of 112 mW. In impulse mode, its power dissi-
pation decreases with the throughput. It consumes 7 µW
maximum when in power-down.
5. Serial or Parallel Interface
Versatile parallel or 2-wire serial interface arrangement
compatible with both 3 V or 5 V logic.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002

1 page




AD7671 pdf
PRELIMINARY TECHNICAL DATA
AD7667
ABSOLUTE MAXIMUM RATINGS*
IN2, TEMP2,REF, REFBUFIN, INGND, REFGND to AGND
. . . . . . . . . . . . . . . . . . . . . . . AVDD + 0.3 V to AGND – 0.3 V
Ground Voltage Differences
AGND, DGND, OGND . . . . . . . . . . . . . . . . . . . . . ±0.3 V
Supply Voltages
AVDD, DVDD, OVDD . . . . . . . . . . . . . . . -0.3V to +7 V
AVDD to DVDD, AVDD to OVDD . . . . . . . . . . . . . ±7 V
DVDD to OVDD . . . . . . . . . . . . . . . . . . . . -0.3V to +7 V
Digital Inputs . . . . . . . . . . . . . . . . –0.3 V to DVDD + 3.0 V
Internal Power Dissipation3 . . . . . . . . . . . . . . . . . . . 700 mW
Internal Power Dissipation4 . . . . . . . . . . . . . . . . . . . . . 2.5 W
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range
(Soldering 10 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2See Analog Input section.
3Specification is for the device in free air:
48-Lead LQFP; θJA = 91°C/W, θJC = 30°C/W
4Specification is for the device in free air:
48-Lead LFCSP; θJA = 26°C/W
1.6mA IOL
TO OUTPUT
PIN CL
60pF*
500A IOH
1.4V
*IN SERIAL INTERFACE MODES, THE SYNC, SCLK, AND
SDOUT TIMINGS ARE DEFINED WITH A MAXIMUM LOAD
CL OF 10pF; OTHERWISE, THE LOAD IS 60pF MAXIMUM.
Figure 1. Load Circuit for Digital Interface Timing,
SDOUT, SYNC, SCLK Outputs, CL = 10 pF
0.8V
t DELAY
2V
0.8V
2V
t DELAY
2V
0.8V
Figure 2. Voltage Reference Levels for Timing
ORDERING GUIDE
Model
Temperature
Range
Package Description
Package Option
AD7667AST
AD7667ASTRL
AD7667ACP
AD7667ACPRL
EVAL-AD7667CB1
EVAL-CONTROL BRD22
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Quad Flatpack (LQFP)
Quad Flatpack (LQFP)
Chip Scale (LFCSP)
Chip Scale (LFCSP)
ST-48
ST-48
CP-48
CP-48
Evaluation Board
Controller Board
NOTES
1This board can be used as a standalone evaluation board or in conjunction with the EVAL-CONTROL BRD2 for evaluation/demonstration purposes.
2This board allows a PC to control and communicate with all Analog Devices evaluation boards ending in the CB designators.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
WARNING!accumulate on the human body and test equipment and can discharge without detection. Although
the AD7667 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
ESD SENSITIVE DEVICE
REV. PrA
–5–

5 Page





AD7671 arduino
PRELIMINARY TECHNICAL DATA
AD7667
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 7. SNR, S/(N+D), and ENOB vs. Frequency
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 8. SNR and S/(N+D) vs. Input Level
(Referred to Full Scale)
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 10. THD, Harmonics, and SFDR vs. Frequency
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 11. Typical Delay vs. Load Capacitance CL
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 9. Operating Currents vs. Sample Rate
0
-20
-40
-60 TO BE
-80 SUPPLIED
-100
-120
-140
-160
1
TPC 12. Power-Down Operating Currents vs. Temperature
REV. PrA
–11–

11 Page







PáginasTotal 23 Páginas
PDF Descargar[ Datasheet AD7671.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AD767Microprocessor-Compatible 12-Bit D/A ConverterAnalog Devices
Analog Devices
AD767116-Bit 1 MSPS SAR Unipolar ADC with RefAnalog Devices
Analog Devices
AD7672HIGH-SPEED 12-BIT ADCAnalog Devices
Analog Devices
AD767418-Bit/ 2.5 LSB INL/ 570 kSPS SAR ADCAnalog Devices
Analog Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar