Datenblatt-pdf.com


ADM805M Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer ADM805M
Beschreibung Microprocessor Supervisory Circuits
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 8 Seiten
ADM805M Datasheet, Funktion
a
Microprocessor
Supervisory Circuits
ADM690A/ADM692A/ADM802L/M/ADM805L/M
FEATURES
Precision Supply Voltage Monitor
4.65 V ADM690A/ADM802L/ADM805L
4.40 V ADM692A/ADM802M/ADM805M
Reset Assertion Down to 1 V VCC
Reset Timeout—200 ms
Watchdog Timer—1.6 s
100 A Quiescent Supply Current
Automatic Battery Backup Power Switching
Voltage Monitor for Power Fail
؎2% Power Fail Accuracy on ADM802L/M
Space-Saving MicroSOIC Package (ADM690A)
APPLICATIONS
Microprocessor Systems
Computers
Controllers
Intelligent Instruments
FUNCTIONAL BLOCK DIAGRAM
VBATT
VCC
BATTERY
SWITCHOVER
VOUT
4.65V*
RESET
GENERATOR
RESET
(RESET)
WATCHDOG
INPUT (WDI)
POWER FAIL
INPUT (PFI)
WATCHDOG
TRANSITION DETECTOR
(1.6s)
1.25V
ADM690A
ADM692A
ADM802L
ADM802M
ADM805L
ADM805M
POWER FAIL
OUTPUT (PFO)
*4.4V FOR ADM692A/ADM802M/ADM805M
( ) = ADM805L/M ONLY
GENERAL DESCRIPTION
The ADM690A/ADM692A/ADM802L/M/ADM805L/M
family of supervisory circuits offers complete single chip
solutions for power supply monitoring and battery control
functions in microprocessor systems. These functions include
µP reset, backup battery switchover, watchdog timer, and power
failure warning.
The ADM690A/ADM692A/ADM802L/M/ADM805L/M are
available in 8-pin packages and provide:
1. Power-on reset output during power-up, power-down and
brownout conditions. The RESET output remains opera-
tional with VCC as low as 1 V.
2. Battery backup switching for CMOS RAM, CMOS
microprocessor or other low power devices.
3. A reset pulse if the optional watchdog timer has not been
toggled within 1.6 seconds.
4. A 1.25 V threshold detector for power fail warning, low battery
detection, or to monitor a power supply other than +5 V.
On the ADM690A/ADM802L/ADM805L the reset voltage
threshold is 4.65 V. On the ADM692A/ADM802M/
ADM805M, the reset voltage threshold is 4.40 V.
The ADM802L/ADM802M guarantee power fail accuracies to
± 2%.
The ADM805L/M provides an active high reset output, RESET
instead of RESET.
The family of products is fabricated using an advanced epitaxial
CMOS process combining low power consumption and high
reliability. RESET assertion is guaranteed with VCC as low as 1 V.
They provide a pin-compatible upgrade for the MAX690A/
MAX692A/MAX802L/MAX802M/MAX805L
All parts are available in 8-pin DIP and SOIC packages. The
ADM690A is also available in a new space-saving microSOIC
package.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700 World Wide Web Site: http://www.analog.com
Fax: 617/326-8703
© Analog Devices, Inc., 1996






ADM805M Datasheet, Funktion
ADM690A/ADM692A/ADM802L/M/ADM805L/M
Table I. Input and Output Status in Battery Backup Mode
Signal
Status
VOUT
RESET
RESET
PFI
PFO
WDI
VOUT is connected to VBATT via an internal
PMOS switch.
Logic low.
Logic high (ADM805L, ADM805M). The open
circuit output voltage is equal to VOUT.
The power fail comparator is disabled
Logic low.
The watchdog timer is disabled
Power Fail Comparator
The power fail comparator is an independent comparator
that may be used to monitor the input power supply. The
comparator’s inverting input is internally connected to a 1.25
V reference voltage. The noninverting input is available at the
PFI input. This input may be used to monitor the input power
supply via a resistive divider network. When the voltage on the
PFI input drops below 1.25 V, the comparator output (PFO)
goes low indicating a power failure. For early warning of power
failure the comparator may be used to monitor the preregulator
input simply by choosing an appropriate resistive divider
network. The PFO output can be used to interrupt the
processor so that a shutdown procedure is implemented before
the power is lost.
INPUT
POWER
R1
1.25V
POWER
R2 FAIL
INPUT
(PFO) POWER FAIL
OUTPUT
Figure 9. Power Fail Comparator
Adding Hysteresis to the Power Fail Comparator
For increased noise immunity, hysteresis may be added to the
power fail comparator. Since the comparator circuit is non-
inverting, hysteresis can be added simply by connecting a
resistor between the PFO output and the PFI input as shown in
Figure 10. When PFO is low, resistor R3 sinks current from the
summing junction at the PFI pin. When PFO is high, resistor
R3 sources current into the PFI summing junction. This results
in differing trip levels for the comparator. Further noise
immunity may be achieved by connecting a capacitor between
PFI and GND.
INPUT
POWER
R1
R2
1.25V
PFI
TO
(PFO) µP NMI
R3
5V
PFO
0V
0V
VL VH
VIN
R2+R3
VH = 1.25 1+ R2 × R3 R1
VL = 1.25+R1
1.25
R2
VCC1.25
R3
R1+R2
VMID= 1.25 R2
Figure 10. Adding Hysteresis to the Power Fail
Comparator
TYPICAL APPLICATIONS
Figure 11 shows a typical power monitoring, battery backup
application. VOUT powers the CMOS RAM. Under normal
operating conditions with VCC present, VOUT is internally
connected to VCC. If a power failure occurs, VCC will decay and
VOUT will be switched to VBATT thereby maintaining power for
the CMOS RAM. A RESET pulse is also generated when VCC
falls below the reset threshold.
UNREGULATED
DC
R1
+5V
VCC
VOUT
PFI
R2
+
BATTERY
VBATT
RESET
PFO
GND WDI
µP POWER
CMOS RAM
POWER
µP SYSTEM
µP RESET
µP NMI
I/O LINE
Figure 11. Typical Application Circuit
The watchdog timer input (WDI) monitors an I/O line from the
µP system. This line must be toggled once every 1.6 seconds to
verify correct software execution. Failure to toggle the line
indicates that the µP system is not correctly executing its
program and may be tied up in an endless loop. If this happens,
a reset pulse is generated to initialize the processor.
–6– REV. 0

6 Page







SeitenGesamt 8 Seiten
PDF Download[ ADM805M Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ADM805LMicroprocessor Supervisory CircuitsAnalog Devices
Analog Devices
ADM805MMicroprocessor Supervisory CircuitsAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche