|
|
PDF ADS803 Data sheet ( Hoja de datos )
| Número de pieza | ADS803 | |
| Descripción | 12-Bit/ 5MHz Sampling ANALOG-TO-DIGITAL CONVERTER | |
| Fabricantes | Burr-Brown Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADS803 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
®
ADS803U
ADS803E
ADS803
12-Bit, 5MHz Sampling
TM
ANALOG-TO-DIGITAL CONVERTER
FEATURES
q HIGH SFDR: 82dB at NYQUIST
q HIGH SNR: 69dB
q LOW POWER: 115mW
q LOW DLE: 0.25LSB
q SMALL 28-LEAD SSOP AND SOIC PACKAGES
DESCRIPTION
The ADS803 is a high-speed, high dynamic range, 12-bit pipelined
analog-to-digital converter. This converter includes a high-band-
width track/hold that gives excellent spurious performance up to
and beyond the Nyquist rate. This high-bandwidth, linear track/hold
minimizes harmonics and has low jitter, leading to excellent SNR
performance. The ADS803 is also pin-compatible with the 10MHz
ADS804 and the 20MHz ADS805.
The ADS803 provides an internal reference and can be programmed
for a 2Vp-p input range for the best spurious performance and ease
of driving. Alternatively, the 5Vp-p input range can be used for the
lowest input referred noise of 0.09 LSBs rms giving superior
imaging performance. There is also a capability to set the input
+VS
ADS803
q FLEXIBLE INPUT RANGE
q OVER-RANGE INDICATOR
APPLICATIONS
q IF AND BASEBAND DIGITIZATION
q CCD IMAGING SCANNERS
q TEST INSTRUMENTATION
range in between the 2Vp-p and 5Vp-p input ranges or to use
external reference. The ADS803 also provides an overrange indica-
tor flag to indicate an input range that exceeds the full-scale input
range of the converter. This flag can be used to reduce the gain of
the front end gain-ranging circuitry.
The ADS803 employs digital error correction techniques to provide
excellent differential linearity for demanding imaging applications.
Its low distortion and high SNR give the extra margin needed for
communications, medical imaging, video and test instrumentation
applications. The ADS803 is available in 28-lead SSOP and SOIC
packages.
CLK VDRV
Timing Circuitry
VIN IN
IN T/H
CM
12-Bit
Pipelined
A/D Core
Error
Correction
Logic
3-State
Outputs
D0
•••
D11
Reference Ladder
and Driver
Reference and
Mode Select
OVR
REFT
VREF
SEL REFB
OE
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©1997 Burr-Brown Corporation
PDS-1398C
Printed in U.S.A. October, 1998
1 page  
TYPICAL PERFORMANCE CURVES
At TA = full specified temperature range, VS = +5V, specified input range = 1.5V to 3.5V, single-ended input and sampling rate = 5MHz, unless otherwise specified.
0
–20
–40
–60
–80
–100
–120
0
SPECTRAL PERFORMANCE
fIN = 500kHz
0.5 1.0 1.5 2.0
Frequency (MHz)
2.5
0
–20
–40
–60
–80
–100
–120
0
SPECTRAL PERFORMANCE
fIN = 2.48MHz
0.5 1.0 1.5 2.0
Frequency (MHz)
2.5
FREQUENCY SPECTRUM
0
f1 = 1.8MHz at –7dB
–20 f2 = 1.9MHz at –7dB
IMD (3) = –74dBc
–40
–60
–80
–100
–120
0
0.5 1.0 1.5 2.0
Frequency (MHz)
2.5
1.0
0.5
0
–0.5
–1.0
0
DIFFERENTIAL LINEARITY ERROR
fIN = 500kHz
1024
2048
Output Code
3072
4096
4.0
2.0
0
–2.0
–4.0
0
INTEGRAL LINEARITY ERROR
fIN = 500kHz
1024
2048
Output Code
3072
4096
SWEPT POWER SFDR
100
fIN = 2.48MHz
80
dBFS
60
40
dBc
20
0
–60 –50 –40 –30 –20 –10
Input Amplitude (dBFS)
0
®
5 ADS803
5 Page 
SELECTING THE INPUT RANGE AND
REFERENCE
Figures 7 through 9 show a selection of circuits for the most
common input ranges when using the internal reference of
the ADS803. All examples are for single-ended input and
operate with a nominal common-mode voltage of +2.5V.
5V
VIN
0V
IN
ADS803
IN
VREF
+2.5V
SEL
FIGURE 7. Internal Reference with 0V to 5V Input Range.
3.5V
1.5V
VIN
+2.5V ext.
IN
ADS803
IN
VREF
+1V
SEL
FIGURE 8. Internal Reference with 1.5V to 3.5V Input
Range.
4V
IN
1V
ADS803
+2.5V ext.
VREF = 1V
1 + R1
R2
FSR = 2 x VREF
IN
VREF
SEL
R1
5kΩ
+1.5V
R2
10kΩ
EXTERNAL REFERENCE OPERATION
Depending on the application requirements, it might be
advantageous to operate the ADS803 with an external refer-
ence. This may improve the DC accuracy if the external
reference circuitry is superior in its drift and accuracy. To
use the ADS803 with an external reference, the user must
disable the internal reference (see Figure 10). By connecting
the SEL pin to +VS, the internal logic will shut down the
internal reference. At the same time, the output of the
internal reference buffer is disconnected from the VREF pin,
which now must be driven with the external reference. Note
that a similar bypassing scheme should be maintained as
described for the internal reference operation.
4.5V
0.5V
VIN
REF1004
+2.5V
+
10µF
+2.5V ext.
1.24kΩ
0.1µF
+2VDC
IN
ADS803
IN
VREF SEL
+5V
4.99kΩ
FIGURE 10. External Reference, Input Range 0.5V to 4.5V
(4Vp-p), with +2.5V Common-Mode Voltage.
DIGITAL INPUTS AND OUTPUTS
Over Range (OVR)
One feature of the ADS803 is its ‘Over Range’ digital output
(OVR). This pin can be used to monitor any out-of-range
condition, which occurs every time the applied analog input
voltage exceeds the input range (set by VREF). The OVR
output is LOW when the input voltage is within the defined
input range. It becomes HIGH when the input voltage is
beyond the input range. This is the case when the input
voltage is either below the bottom reference voltage or
above the top reference voltage. OVR will remain active
until the analog input returns to its normal signal range and
another conversion is completed. Using the MSB and its
complement in conjunction with OVR, a simple clue logic
can be built that detects the overrange and underrange
conditions (see Figure 11). It should be noted that OVR is a
digital output which is updated along with the bit informa-
tion corresponding to the particular sampling incidence of
the analog signal. Therefore, the OVR data is subject to the
same pipeline delay (latency) as the digital data.
FIGURE 9. Internal Reference with 1V to 4V Input Range.
®
11 ADS803
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ADS803.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADS800 | 12-Bit/ 40MHz Sampling ANALOG-TO-DIGITAL CONVERTER | Burr-Brown Corporation |
| ADS800 | 12-Bit 40MHz Sampling Analog-To-Digital Converter (Rev. B) |  Texas Instruments |
| ADS800ESSOP | 12-Bit/ 40MHz Sampling ANALOG-TO-DIGITAL CONVERTER | Burr-Brown Corporation |
| ADS800USOIC | 12-Bit/ 40MHz Sampling ANALOG-TO-DIGITAL CONVERTER | Burr-Brown Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |