Datenblatt-pdf.com


AG101-PCB Schematic ( PDF Datasheet ) - ETC

Teilenummer AG101-PCB
Beschreibung High Dynamic Range Gain Block
Hersteller ETC
Logo ETC Logo 




Gesamt 7 Seiten
AG101-PCB Datasheet, Funktion
AG101
High Dynamic Range Gain Block
The Communications Edge
Advanced Product Information
Product Features
60 - 3000 MHz
+32 dBm Output IP3
2.4 dB Noise Figure
14 dB Gain
+15 dBm P1dB
MTBF >1000 Years
SOT-89 SMT Package
Single Bias Supply
(+3.3 V or +4.5 V)
Product Description
Functional Diagram
The AG101 is a general purpose gain block that
offers good dynamic range in a low cost surface
mount package. The combination of flat OIP3
and noise figure performance over frequency
makes it attractive for for both narrow band
and broadband applications. Superior thermal
design allows the product to achieve +32 dBm
OIP3 performance at a mounting temperature
of +85°C with an associated MTBF of >1000
years3. All devices are 100% RF and DC tested.
4
123
Function
Input
Ground
Output/Bias
Ground
Pin No.
1
2
3
4
Actual Size
Specifications
Parameter
Units Min. Typical Max.
Frequency Range
MHz
60-3000
S21 - Gain
dB 13.0 14.0 16.0
S11 - Input Return Loss dB
-9.0
S22 - Output Return Loss dB
-15.0
Output IP3
dBm +28 +32 +36
Output P1dB
dBm +15
Noise Figure
dB 2.4
Operating Current Range mA 40
50 75
Supply Voltage V 4.5
Test conditions unless otherwise noted.
1. T = 25°C, Vdd = 4.5 V, Frequency = 800 MHz, 50 ohm system.
2. 3OIP measured with two tones at an output power of 2 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 slope rule.
3. MTBF calculated with ground lead temperature at 85°C.
4. S11 can be improved using an optional matching network.
Recommended Maximum Ratings
Parameter
Rating
Operating Case Temperature
Storage Temperature
DC Voltage
RF Input Power (continuous)
-40 to +85°C
-55 to +125°C
+5.5 V
+4 dBm
Operation of this device above any of these parameters may cause permanent damage.
Typical Parameters
Parameter
Units
Typical
Frequency
S21
S11
S22
Output IP3
Output P1dB
Noise Figure
MHz
dB
dB
dB
dBm
dBm
dB
900
13.4
-12.5
-21.2
+32.5
+15.1
2.4
1900
12.2
-13.2
-17.8
+33.1
+15.0
2.6
Typical parameters reflect performance in an applicaton circuit.
Ordering Information
Part No.
AG101
AG101-PCB
Description
GaAs MMIC Amplifier
(Available in tape and reel)
Fully Assembled Application Circuit
WJ Communications, Inc. Phone: 1-800-WJ1-4401 FAX: 408-577-6620 e-mail: [email protected] Web site: www.wj.com
April 2002






AG101-PCB Datasheet, Funktion
Outline Drawing
AG101
Advanced Product Information
Land Pattern
Mounting Configuration
This document contains information on a new product.
Specifications and information are subject to change without notice.
Caution! ESD sensitive device.
WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com
April 2002

6 Page







SeitenGesamt 7 Seiten
PDF Download[ AG101-PCB Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AG101-PCBHigh Dynamic Range Gain BlockETC
ETC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche