|
|
PDF GTTY43SP7F1R0 Data sheet ( Hoja de datos )
| Número de pieza | GTTY43SP7F1R0 | |
| Descripción | LCD Module | |
| Fabricantes | SGD | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GTTY43SP7F1R0 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
Model: GTTY43SP7F1R0
Rev. No.
A.1
Issued Date.
July. 23, 07
Page.
1 / 36
Thin-Film-Transistor LCD Module
Model: GTTY43SP7F1R0
Acceptance
Solomon Goldentek Display Corp.
5F, No. 42, Shing Zhong Rd.,
Nei Hu, Taipei 114, Taiwan
FAX: 886-2-87919825
Approved and Checked by
Approved by
Checked by
Made by
1 page  
Product Specification
Model: GTTY43SP7F1R0
Rev. No.
A.1
Issued Date.
July. 23, 07
Page.
5 / 36
2 Mechanical Information
Item
Min.
Typ.
Max.
Unit Note
Horizontal (H)
--
105.5
--
mm --
Module Size
Vertical (V)
--
67.20
--
mm (1)
Thickness (T)
--
5.05
-- mm (1)
Weight
-- N/A
Note (1) Not include FPC.
Refer to the Dimensional Outlines for further information.
(2) Back-light & touch panel unit are included.
--
g --
3 Absolute Maximum Ratings
3.1 Absolute Ratings of Environment
If the operating condition exceeds the following absolute maximum ratings, the TFT LCD module
may be damaged permanently.
(Ta=25±2°C, VSS=GND=0)
Item
Symbol
Min.
Max.
Unit Note
Storage temperature
Operating temperature
(Ambient temperature)
TSTG
TOPR
-20
-10
70 °C (1)
60 °C (1), (2)
Note (1) 90 % RH Max. ( 60 °C ≥ Ta )
Absolute humidity shall be less than 90 % RH (Ta > 60 °C) No condensation.
Note (2) In case of below 0°, the response time of liquid crystal (LC) becomes slower and the
color of panel becomes darker than normal one. Level of retardation depends on
temperature, because of LC's character.
5 Page 
Product Specification
Model: GTTY43SP7F1R0
Rev. No.
A.1
Issued Date.
July. 23, 07
Page.
11 / 36
5.2 Power ON/OFF sequence
This LCM has a power ON/OFF sequence control function. When DISP pin is pulled. “H”, blank data is
outputted for 10-frames first, from the falling edge of the following VSYNC signal. Similarly, when
DISP is pulled “L”, 10-frames of blank data will be outputted from the falling edge of the following
VSYNC, too. The blank data would be gray level 0 for normally black LC (NBW=”H”), and be gray
level 255 for normally white LC (NBW=”L”).
DISP
DISPG
Vsync
01
8 9 10 11
01
7 8 9 10 11
Source
Output invalid
Blank data (*1)
valid
Blank data (*1)
invalid
This LCM is internally initialized by the global reset signal, RESETB. The reset input must be held for
at least 1ms after power is stable.
DVDD
90%
RESETB
T T>1ms
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet GTTY43SP7F1R0.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GTTY43SP7F1R0 | LCD Module | SGD |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |