|
|
Teilenummer | DMF5005N-AAE-CO |
|
Beschreibung | LCD Module | |
Hersteller | OPTREX CORPORATION | |
Logo | ||
Gesamt 19 Seiten LCD Module Specification
Type No.
First Edition
Approved by
Sep 7, 2000
Final Revision
********
Checked by
Checked by
Prepared by
Production Div.
Quality Assurance Div.
Design Engineering Div.
Production Div.
Table of Contents
1. General Specifications ........................................................................................ 2
2. Electrical Specifications...................................................................................... 3
3. Optical Specifications......................................................................................... 7
4. I/O Terminal.......................................................................................................... 9
5. Test....................................................................................................................... 12
6. Appearance Standards..................................................................................... 13
7. Code System of Production Lot................................................................... 16
8. Type Number...................................................................................................... 16
9. Applying Precautions....................................................................................... 16
10. Precautions Relating Product Handling....................................................... 17
11. Warranty.............................................................................................................. 18
Rev. Date
Revision History
Page
Comment
DMF5005N-AAE-CO (CO) No.2000-0276
OPTREX CORPORATION
OPTREX
Page 1/18
DMF5005N-AAE-CO (CO) No.2000-0276
OPTREX CORPORATION
OPTREX
Page 6/18
6 Page 5.Test
No change on display and in operation under the following test condition.
No. Parameter
1 High Temperature Operating
2 Low Temperature Operating
3 High Temperature Storage
4 Low Temperature Storage
5 Damp Proof Test
6 Vibration Test
7 Shock Test
Conditions
50 2 , 96hrs (operation state)
0 2 , 96hrs (operation state)
60 2 , 96hrs
-20 2 , 96hrs
40 2 , 90 95%RH, 96hrs
Total fixed amplitude : 1.5mm
Vibration Frequency : 10 55Hz
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
To be measured after dropping from 60cm high on
the concrete surface in packing state.
Notes
3
4
3, 4
3, 4
5
E
B
Dropping method corner dropping
F A corner : once
GD C
Edge dropping
B,C,D edge : once
A Face dropping
60cm
E,F,G face : once
Concrete Surface
Note 1 : Unless otherwise specified, tests will be conducted under the following condition.
Temperature : 20 5
Humidity : 65 5%
Note 2 : Unless otherwise specified, tests will be not conducted under functioning state.
Note 3 : No dew condensation to be observed.
Note 4 : The function test shall be conducted after 4 hours storage at the normal temperature and humidity
after removed from the test chamber.
Note 5 : Vibration test will be conducted to the product itself without putting it in a container.
DMF5005N-AAE-CO (CO) No.2000-0276
OPTREX CORPORATION
OPTREX
Page 12/18
12 Page | ||
Seiten | Gesamt 19 Seiten | |
PDF Download | [ DMF5005N-AAE-CO Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
DMF5005N-AAE-CO | LCD Module | OPTREX CORPORATION |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |