|
|
PDF DG24064A-YGH-VZ Data sheet ( Hoja de datos )
| Número de pieza | DG24064A-YGH-VZ | |
| Descripción | Display Module | |
| Fabricantes | Densitron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DG24064A-YGH-VZ (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Densitron Corporation.
6F K2bldg, 3-4-4,Ohmorikita,Ohta-Ku, Tokyo143-0016 Japan
http://www.demsitron.co.jp
SPECIFICATION
CUSTOMER :
MODULE NO.:
DG24064A-YGH-VZ#
APPROVED BY:
( FOR CUSTOMER USE ONLY )
PCB VERSION:
DATA:
SALES BY
APPROVED BY
CHECKED BY
PREPARED BY
ISSUED DATE:
Page 1 of 42
1 page  
2.Precautions in use of LCD Modules
(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of
LCD module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.
(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
3.General Specification
Item
Number of Characters
Module dimension
View area
Active area
Dot size
Dot pitch
LCD type
Duty
View direction
Backlight Type
Dimension
240*64 dot
180.0 x 65.0 x 16.0(MAX)
133.0 x 39.0
127.16 x 33.88
0.49 x 0.49
0.53 x 0.53
STN Positive, Gray; Transflective,
1/64
6 o’clock
LED, Yellow Green
Unit
－
mm
mm
mm
mm
mm
Page 5 of 42
5 Page 
‧Flowchart of communications with MPU
(1) Status Read
A status check must be performed before data is read or written.
Status check
The Status of T6963C can be read from the data lines.
RD L
WR H
CE L
C/D H
Do to D7
H
The T6963C status word format is as follows:
MSB
STA7
D7
STA6
D6
STA5
D5
STA4
D4
STA3
D3
STA2
D2
STA1
D1
LSB
STA0
D0
STA0
STA1
STA2
STA3
Check command execution capability
Check data read/write Capability
Check Auto mode data read capability
Check Auto mode data write capability
0:Disable
1:Enable
0:Disable
1:Enable
0:Disable
1:Enable
0:Disable
1:Enable
STA4 Not used
－
STA5
STA6
STA7
Check controller operation capability
Error flag. Used for Screen Peek and Screen copy
commands.
Check the blink condition
0:Disable
1:Enable
0:No error
1:Error
0:Disable off
1:Normal display
(Note 1) It is necessary to check STA0 and STA1 at the same time.
There is a possibility of erroneous operation due to a hardware interrupt.
(Note 2) For most modes STA0/STA1 are used as a status check.
(Note 3) STA2 and STA3 are valid in Auto mode; STA0 and STA1 are invalid.
Status Checking flow
Page 11 of 42
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet DG24064A-YGH-VZ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DG24064A-YGH-VZ | Display Module | Densitron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |