|
|
Número de pieza | P16803 | |
Descripción | PMOLED Module | |
Fabricantes | Iexcellence | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de P16803 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! 1. SCOPE
The purpose of this specification is to define the general provisions and quality
requirements that apply to the supply of display cells manufactured by
Iexcellence. This document, together with the Module Assembly Drawing, is the
highest-level specification for this product. It describes the product, identifies
supporting documents and contains specifications.
2. WARRANTY
Iexcellence warrants that the products delivered pursuant to this specification (or
order) will conform to the agreed specifications for twelve (12) months from the
shipping date ("Warranty Period"). Iexcellence is obligated to repair or replace
the products which are found to be defective or inconsistent with the
specifications during the Warranty Period without charge, on condition that the
products are stored or used as the conditions specified in the specifications.
Nevertheless, Iexcellence is not obligated to repair or replace the products
without charge if the defects or inconsistency are caused by the force majeure
or the reckless behaviors of the customer.
After the Warranty Period, all repairs or replacements of the products are
subject to charge.
3. FEATURES
‐ Small molecular organic light emitting diode.
‐ Color : 262 K color and 65K colors
‐ Panel resolution : 160*128
‐ Driver IC : SSD1353
‐ Excellent Quick response time : 10µs
‐ Extremely thin thickness for best mechanism design. : 2.05 mm
‐ High contrast : 2000:1
‐ Wide viewing angle : 160°
‐ Strong environmental resistance.
‐ 8/9/16/18-bits 6800/8080-series Parallel Interface, Serial Peripheral
Interface.
‐ Wide range of operating temperature : -40 to 70°C
‐ Anti-glare polarizer.
-4-
REV.: A05 2014/03/31
1 page 4. MECHANICAL DATA
NO ITEM
SPECIFICATION
UNIT
1 Dot Matrix
2 Dot Size
3 Dot Pitch
160 x 3x 128
0.048 (W) x 0.199 (H)
0.073 (W) x 0.219 (H)
dot
mm2
mm2
4 Aperture Rate
5 Active Area
6 Panel Size
60
35.015 (W) x 28.012 (H)
42.7 (W) x 33.4 (H)
%
mm2
mm2
7* Panel Thickness
8 Module Size
1.85 ± 0.1
42.7 (W) x 79.5 (H) x 2.05 (T)
mm
mm3
9 Diagonal A/A size
1.8
inch
10 Module Weight
6.1 ± 10%
gram
* Panel thickness includes substrate glass, cover glass and UV glue
thickness.
-5-
REV.: A05 2014/03/31
5 Page 31 D9
32 D10
33 D11
34 D12
35 D13
36 D14
37 D15
38 D16
39 D17
40 IREF A resistor should be connected between this pin and VSS.
41 VSS Ground pin.
42 VLSS Analog system ground pin.
43 VCOMH A capacitor should be connected between this pin and VSS.
44 VCC Power supply for panel driving voltage.
45 NC No connection.
- 11 -
REV.: A05 2014/03/31
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet P16803.PDF ] |
Número de pieza | Descripción | Fabricantes |
P16803 | PMOLED Module | Iexcellence |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |