Datenblatt-pdf.com


RB088T100FH Schematic ( PDF Datasheet ) - ROHM Semiconductor

Teilenummer RB088T100FH
Beschreibung Schottky Barrier Diode
Hersteller ROHM Semiconductor
Logo ROHM Semiconductor Logo 




Gesamt 8 Seiten
RB088T100FH Datasheet, Funktion
Schottky Barrier Diode
RB088T100FH
Application
Switching power supply
Dimensions (Unit : mm)
4.5±00..31
Datasheet
AEC-Q101 Qualified
Structure
Features
1) Cathode common type
2) High reliability
3) Super low IR
10.0±
0.3
0.1
3.2±0.2
1
1.2
2.8±00..21
(1) (2) (3)
Anode Cathode Anode
Construction
Silicon epitaxial planar type
1.3
0.8
2.45±0.5 2.45±0.5
(1) (2) (3)
2.6±0.5
0.75±00..015
ROHM : TO220FN
1 : Manufacture Date
Absolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits Unit
Repetitive peak reverse voltage
VRM
Duty0.5
110 V
Reverse voltage
VR Direct reverse voltage
Average forward rectified current
Non-repetitive forward current surge peak
Io
IFSM
Glass epoxy board mounted, 60Hz half sin wave,
resistive load, IO/2 per diode, Tc=137ºC Max.
60Hz half sin wave, Non-repetitive at
Ta=25ºC, 1cycle, per diode
Operating junction temperature
Tj
-
100
10
100
150
V
A
A
°C
Storage temperature
Tstg
- 55 to 150 °C
Electrical and Thermal Characteristics (Tj= 25°C)
Parameter
Symbol
Conditions
Forward voltage
VF IF=5A
Reverse current
IR VR=100V
Thermal resistance
Rth(j-c)
Junction to case
Min. Typ. Max. Unit
- - 0.87 V
- - 5 A
- - 2 °C / W
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
2015.08 - Rev.A






RB088T100FH Datasheet, Funktion
Datasheet
Notice
Precaution on using ROHM Products
1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001

6 Page







SeitenGesamt 8 Seiten
PDF Download[ RB088T100FH Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
RB088T100FHSchottky Barrier DiodeROHM Semiconductor
ROHM Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche