Datenblatt-pdf.com


RB068LAM-60 Schematic ( PDF Datasheet ) - ROHM Semiconductor

Teilenummer RB068LAM-60
Beschreibung Schottky Barrier Diode
Hersteller ROHM Semiconductor
Logo ROHM Semiconductor Logo 




Gesamt 7 Seiten
RB068LAM-60 Datasheet, Funktion
Schottky Barrier Diode
RB068LAM-60
Data Sheet
lApplications
General rectification
lFeatures
1) Small power mold type
(PMDTM)
2) High reliability
3) Super low IR
lDimensions (Unit : mm)
2.50±0.20
(1)
0.17±
0.10
0.05
lLand Size Figure (Unit : mm)
2.0
PMDTM
(2)
1.50±0.20
0.95±0.10
lStructure (1) Cathode
lConstruction
Silicon epitaxial planar type
ROHM : PMDTM
JEDEC : SOD-128
: Manufacture Date
lTaping Dimensions (Unit : mm)
2.00 ±0.05
4.0 ±0.1
φ1.5
+0.1
-0.0
(2) Anode
0.25 ±0.05
φ1.5
+0.1
-0.0
2.8 ±0.05
4.0 ±0.1
1.25 ±0.10
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Repetitive peak reverse voltage
Reverse voltage
Average forward rectified current
Non-repetitive forward current surge peak
VRM
VR
IO
IFSM
Operating junction temperature
Storage temperature
Tj
Tstg
Conditions
Duty0.5
Direct reverse voltage
Glass epoxy board mounted, 60Hz half
sin wave, resistive load, Tc=125ºC Max.
60Hz half sin wave, onecycle,
non-repetitive at Ta=25ºC
-
-
Limits Unit
60 V
60 V
2A
70 A
150 °C
-55 to +150 °C
lElectrical Characteristics (Tj = 25°C)
Parameter
Symbol
Forward voltage
Reverse current
VF
IR
Conditions
IF=2.0A
VR=60V
Min. Typ. Max. Unit
- - 0.68 V
- - 2.0 mA
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
1/4
2016.09 - Rev.A






RB068LAM-60 Datasheet, Funktion
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHMs internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.003

6 Page







SeitenGesamt 7 Seiten
PDF Download[ RB068LAM-60 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
RB068LAM-60Schottky Barrier DiodeROHM Semiconductor
ROHM Semiconductor
RB068LAM-60TFSchottky Barrier DiodeROHM Semiconductor
ROHM Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche