Datenblatt-pdf.com


ADuM221N Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer ADuM221N
Beschreibung 5.0 kV RMS Dual Channel Digital Isolators
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 23 Seiten
ADuM221N Datasheet, Funktion
Data Sheet
5.0 kV RMS Dual Channel Digital Isolators
ADuM220N/ADuM221N/ADuM225N/ADuM226N
FEATURES
High common-mode transient immunity: 100 kV/μs
High robustness to radiated and conducted noise
Low propagation delay: 13 ns maximum for 5 V operation,
15 ns maximum for 1.8 V operation
150 Mbps maximum data rate
Safety and regulatory approvals (pending)
UL recognition: 5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A
VDE certificate of conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 849 V peak
10,000 V peak surge/impulse voltage rating
CQC Certification per GB4943.1-2011
Low dynamic power consumption
1.8 V to 5 V level translation
High temperature operation: 125°C maximum
Fail-safe high or low options
8-lead/16-lead, RoHS compliant SOIC packages
Qualified for automotive applications
APPLICATIONS
General-purpose multichannel isolation
Industrial field bus isolation
Automotive systems
GENERAL DESCRIPTION
The ADuM220N/ADuM221N/ADuM225N/ADuM226N1 are
dual-channel digital isolators based on Analog Devices, Inc.,
iCoupler® technology. Combining high speed, complementary
metal-oxide semiconductor (CMOS) and monolithic air core
transformer technology, these isolation components provide
outstanding performance characteristics superior to alternatives
such as optocoupler devices and other integrated couplers. The
maximum propagation delay is 13 ns with a pulse width distortion
(PWD) of less than 3 ns at 5 V operation. Channel matching is
tight at 3.0 ns maximum.
The ADuM220N/ADuM221N/ADuM225N/ADuM226N data
channels are independent and are available in a variety of
configurations with a withstand voltage rating of 5.0 kV rms (see
the Ordering Guide). The devices operate with the supply voltage
on either side ranging from 1.8 V to 5 V, providing compatibil-
ity with lower voltage systems as well as enabling voltage translation
functionality across the isolation barrier. Unlike other optocoupler
alternatives, dc correctness is ensured in the absence of input logic
transitions. Two different fail-safe options are available, in which
FUNCTIONAL BLOCK DIAGRAMS
GND1 1
NIC 2
VDD1 3
VIA 4
VIB 5
NIC 6
GND1 7
NIC 8
ENCODE
ENCODE
ADuM220N 16 GND2
15 NIC
DECODE
14 VDD2
13 VOA
DECODE
12 VOB
11 NIC
10 NIC
Figure 1.
9 GND2
GND1 1
NIC 2
VDD1 3
VOA 4
VIB 5
NIC 6
GND1 7
NIC 8
DECODE
ENCODE
ADuM221N
ENCODE
DECODE
Figure 2.
16 GND2
15 NIC
14 VDD2
13 VIA
12 VOB
11 NIC
10 NIC
9 GND2
VDD1 1
ADuM225N
8 VDD2
VIA 2
ENCODE
DECODE
7 VOA
VIB 3
ENCODE
DECODE
6 VOB
GND1 4
Figure 3.
5 GND2
VDD1 1
ADuM226N
8 VDD2
VOA 2
DECODE
ENCODE
7 VIA
VIB 3
ENCODE
DECODE
6 VOB
GND1 4
5 GND2
Figure 4
the outputs transition to a predetermined state when the input
power supply is not applied or the inputs are disabled.The
ADuM220N0 is pin compatible with the ADuM2210 RW-16
package. The ADuM220N1 is pin compatible with the
ADuM2200 RW-16 package. The ADuM221N0 is pin compati-
ble with the ADuM2211 RW-16 package. The ADuM221N1 is
pin compatible with the ADuM2201 RW-16 package.
1 Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com






ADuM221N Datasheet, Funktion
ADuM220N/ADuM221N/ADuM225N/ADuM226N
Data Sheet
ELECTRICAL CHARACTERISTICS—2.5 V OPERATION
All typical specifications are at TA = 25°C, VDD1 = VDD2 = 2.5 V. Minimum/maximum specifications apply over the entire recommended
operation range: 2.25 V ≤ VDD1 ≤ 2.75 V, 2.25 V ≤ VDD2 ≤ 2.75 V, −40°C ≤ TA ≤ +125°C, unless otherwise noted. Switching specifications
are tested with CL = 15 pF and CMOS signal levels, unless otherwise noted. Supply currents are specified with 50% duty cycle signals.
Table 5.
Parameter
SWITCHING SPECIFICATIONS
Pulse Width
Data Rate
Propagation Delay
Pulse Width Distortion
Change vs. Temperature
Propagation Delay Skew
Channel Matching
Codirectional
Opposing Direction
Jitter
DC SPECIFICATIONS
Input Threshold
Logic High
Logic Low
Output Voltage
Logic High
Logic Low
Input Current per Channel
Quiescent Supply Current
ADuM220N/ADuM225N
ADuM221N/ADuM226N
Dynamic Supply Current
Dynamic Input
Dynamic Output
Undervoltage Lockout
Positive VDDx Threshold
Negative VDDx Threshold
VDDx Hysteresis
Symbol Min Typ Max Unit Test Conditions/Comments
PW 6.6
ns Within PWD limit
150
Mbps
Within PWD limit
tPHL, tPLH 5.0 7.0 14
ns
50% input to 50% output
PWD
0.7 3
ns |tPLH − tPHL|
1.5 ps/°C
tPSK
7.0 ns
Between any two units at the same
temperature, voltage, and load
tPSKCD
tPSKOD
0.7 3.0
0.7 3.0
320
65
ns
ns
ps p-p
ps rms
See the Jitter Measurement section
See the Jitter Measurement section
VIH 0.7 × VDDx
VIL
V
0.3 × VDDx V
VOH VDDx − 0.1 VDDx
VDDx − 0.4 VDDx − 0.2
VOL 0.0 0.1
0.2 0.4
II
−10
+0.01
+10
V
V
V
V
µA
IOx1 = −20 µA, VIx = VIxH2
IOx1 = −2 mA, VIx = VIxH2
IOx1 = 20 µA, VIx = VIxL3
IOx1 = 2 mA, VIx = VIxL3
0 V ≤ VIx ≤ VDDx
IDD1 (Q)
IDD2 (Q)
IDD1 (Q)
IDD2 (Q)
IDD1 (Q)
IDD2 (Q)
IDD1 (Q)
IDD2 (Q)
IDDI (D)
IDDO (D)
VDDxUV+
VDDxUV−
VDDxUVH
0.8 1.2
1.2 1.8
6.2 9.5
1.3 1.8
1.0 1.5
1.0 1.4
3.9 5.8
4.8 6.4
0.01
0.01
1.6
1.5
0.1
mA VI4 = 0 (N0), 1 (N1)5
mA VI4 = 0 (N0), 1 (N1)5
mA VI4 = 1 (N0), 0 (N1)5
mA VI4 = 1 (N0), 0 (N1)5
mA
mA
mA
mA
mA/Mbps
mA/Mbps
VI4 = 0 (N0), 1 (N1)5
VI4 = 0 (N0), 1 (N1)5
VI4 = 1 (N0), 0 (N1)5
VI4 = 1 (N0), 0 (N1)5
Inputs switching, 50% duty cycle
V
V
V
Rev. A | Page 6 of 23

6 Page









ADuM221N pdf, datenblatt
ADuM220N/ADuM221N/ADuM225N/ADuM226N
RECOMMENDED OPERATING CONDITIONS
Table 16.
Parameter
Operating Temperature
Supply Voltages
Input Signal Rise and Fall Times
Symbol
TA
VDD1, VDD2
Rating
−40°C to +125°C
1.7 V to 5.5 V
1.0 ms
Data Sheet
Rev. A | Page 12 of 23

12 Page





SeitenGesamt 23 Seiten
PDF Download[ ADuM221N Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ADUM2210(ADUM2210 / ADUM2211) Dual-Channel Digital IsolatorsAnalog Devices
Analog Devices
ADUM2211(ADUM2210 / ADUM2211) Dual-Channel Digital IsolatorsAnalog Devices
Analog Devices
ADuM221N5.0 kV RMS Dual Channel Digital IsolatorsAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche