DataSheet39.com

What is ADL5724?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "Low Noise Amplifier".


ADL5724 Datasheet PDF - Analog Devices

Part Number ADL5724
Description Low Noise Amplifier
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and ADL5724 download ( pdf file ) link at the bottom of this page.





Total 13 Pages



Preview 1 page

No Preview Available ! ADL5724 datasheet, circuit

Data Sheet
12.7 GHz to 15.4 GHz, Low Noise Amplifier
ADL5724
FEATURES
Frequency range: 12.7 GHz to 15.4 GHz
Typical gain of >23.7 dB
Low noise input
Noise figure
2.1 dB typical at 12.7 GHz
2.4 dB typical at 15.4 GHz
High linearity input
≥2.0 dBm typical input third-order intercept (IIP3)
−8 dBm input 1 dB compression point (P1dB) at 15.4 GHz
Matched 50 Ω single-ended input
Matched 100 Ω differential outputs
8-lead, 2.00 mm × 2.00 mm LFCSP microwave packaging
APPLICATIONS
Point to point microwave radios
Instrumentation
Satellite communications (SATCOM)
Phased arrays
FUNCTIONAL BLOCK DIAGRAM
VCC1
50GND
SINGLE-ENDED
INPT
RBIAS
ADL5724
VCC2
OUTN 100Ω
DIFFERENTIAL
OUTP
DNC
DNC = DO NOT CONNECT.
DO NOT CONNECT TO THIS PIN.
Figure 1.
GENERAL DESCRIPTION
The ADL5724 is a narrow-band, high performance, low noise
amplifier (LNA) targeting microwave radio link receiver designs.
The monolithic silicon germanium (SiGe) design is optimized for
microwave radio link bands ranging from 12.7 GHz to 15.4 GHz.
The unique design offers a single-ended 50 Ω input impedance
and provides a 100 Ω balanced differential output that is ideal
for driving Analog Devices, Inc., differential downconverters
and radio frequency (RF) sampling analog-to-digital converters
(ADCs). This LNA provides noise figure performance that, in
the past, required more expensive three-five (III-V) compounds
process technology to achieve.
The ADL5721 and ADL5723 to ADL5726 family of narrow-
band LNAs are each packaged in a tiny, thermally enhanced,
2.00 mm × 2.00 mm LFCSP package. The ADL5721 and
ADL5723 to ADL5726 family operates over the temperature
range of −40°C to +85°C.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

line_dark_gray
ADL5724 equivalent
ADL5724
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltages
VCC1
VCC2
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature Range (Soldering, 60 sec)
Rating
2.25 V
4.1 V
150°C/W
−40°C to +85°C
−55°C to +125°C
−65°C to +150°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Data Sheet
THERMAL RESISTANCE
θJA is thermal resistance, junction to ambient (°C/W), θJB is
thermal resistance, junction to board (°C/W), and θJC is thermal
resistance, junction to case (°C/W).
Table 4. Thermal Resistance
Package Type
θJA1
θJB1
θJC1 Unit
8-Lead LFCSP
39.90
23.88
3.71 °C/W
1 See JEDEC standard JESD51-2 for additional information on optimizing the
thermal impedance for a printed circuit board (PCB) with 3 × 4 vias.
ESD CAUTION
Rev. 0 | Page 4 of 12


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ADL5724 electronic component.


Information Total 13 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ADL5724.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ADL5721The function is Low Noise Amplifier. Analog DevicesAnalog Devices
ADL5723The function is Low Noise Amplifier. Analog DevicesAnalog Devices
ADL5724The function is Low Noise Amplifier. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ADL5     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search