|
|
PDF ADN3010-11 Data sheet ( Hoja de datos )
| Número de pieza | ADN3010-11 | |
| Descripción | 11.3 Gbps Optical Receiver | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADN3010-11 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Data Sheet
FEATURES
Integrated SiGe PIN photodiode, transimpedance amplifier
(TIA), and limiting amplifier (LA)
Power monitor output: 1.0 A/W at O band wavelengths
50 µm diameter germanium photodiode
Input sensitivity
POMA = −16.5 dBm
PAVE = −17.3 dBm (ER = 6 dB)
PRBS31 at 10.52 Gbps, BER = 10−12, λ = 1270 nm, 1290 nm,
1300 nm, 1310 nm, and 1330 nm
Antireflective coating (ARC) optimized to 1310 nm
Single 3.3 V supply
Power dissipation: 102 mW
Differential output swing: 460 mV p-p
On-chip power monitor function
Die size: 0.835 mm × 0.675 mm
APPLICATIONS
Optical module receivers up to 11.3 Gbps
Short range 10 Gb SONET, FC, Ethernet, CPRI, OBSAI, and LTE
optical receivers
Capable to be in ROSA, BOSA, or MCM packages
GENERAL DESCRIPTION
The ADN3010-11 is a high speed optical receiver featuring a
proprietary large area germanium photodiode monolithically
integrated with a silicon TIA and LA. The integration of the
photodiode eliminates bond wires between the diode and the
TIA that provides guaranteed performance and improved
manufacturing reliability. The 50 µm diameter photodetector
enables an easy optical coupling design when aligned with a
single mode fiber (SMF). With a 1310 nm optimized ARC, the
ADN3010-11 supports 10GBASE-LR and other applications
with extended data rates of up to 11.3 Gbps.
Although the ADN3010-11 can operate in the wavelength range
from 850 nm to 1565 nm, it has an antireflective coating (ARC)
centered at 1310 nm and is characterized only at original band
11.3 Gbps Optical Receiver
ADN3010-11
FUNCTIONAL BLOCK DIAGRAM
VCC
VCC
ADN3010-11
50Ω
50Ω
OUT+
OUT–
POWER
MONITOR
GND
Figure 1.
PM
(O band) wavelengths (1270 nm, 1290 nm, 1300 nm, 1310 nm,
and 1330 nm) in this data sheet.
The power monitor pin provides either an output voltage or
current that is proportional to the sensed average photocurrent.
Typical power consumption of the ADN3010-11 is 102 mW
from a single 3.3 V supply. When the output is saturated, it has
a typical differential amplitude of 460 mV p-p at 10.52 Gbps.
The ADN3010-11 is available in die form, and it is operational
over the extended industrial temperature range of −40°C to
+85°C.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2015–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page  
ADN3010-11
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Optical Input Peak Power
Maximum Voltage to All Input and
Output Signal Pins
Minimum Voltage to All Input and
Output Pins
Storage Temperature Range
Die Attach Temperature (<30 sec)
Junction Temperature
Rating
4.5 V
10 dBm
VCC + 0.4 V
GND − 0.4 V
−65°C to +125°C
410°C
150°C
Data Sheet
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
Rev. A | Page 4 of 10
5 Page 
ADN3010-11
Data Sheet
ORDERING GUIDE
Model1, 2
ADN3010-11-50A-DF
ADN3010-11-50A-RL7
ADN3010-11-50A-WP
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
6-Inch Film Frame
11-Pad Bare Die [CHIP] Reel
2” × 2”Waffle Pack
Ordering Quantity
12,792 per film frame
5,000 per reel
Variable per waffle pack3
Package Option
C-11-1
C-11-1
C-11-1
1 The ordering guide model is composed of the following fields: -11: data rate option, -50: the integrated photodiode diameter, A: the release version,-Rxx: the reel
package option, -DF: film frame package option, and –WP: waffle package options.
2 Contact Analog Devices, Inc., for more information about the 6-inch film frame or 2 in × 2 in waffle packs.
3 Order quantity N dependent, N = 10 × i (i = 1, 2, …, 40).
©2015–2016 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D11858-0-9/16(A)
Rev. A | Page 10 of 10
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet ADN3010-11.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADN3010-11 | 11.3 Gbps Optical Receiver | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |