ADA4807-2 Datasheet PDF - Analog Devices
| Part Number | ADA4807-2 | |
| Description | Rail-to-Rail Input/Output Amplifiers | |
| Manufacturers | Analog Devices | |
| Logo |  |
|
|
There is a preview and ADA4807-2 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
Data Sheet
3.1 nV/√Hz, 1 mA, 180 MHz,
Rail-to-Rail Input/Output Amplifiers
ADA4807-1/ADA4807-2/ADA4807-4
FEATURES
Low input noise
3.1 nV/√Hz at f = 100 kHz with 29 Hz 1/f corner
0.7 pA/√Hz at f = 100 kHz with 2 kHz 1/f corner
High speed performance with dc precision
180 MHz, −3 dB bandwidth (G = +1, VOUT = 20 mV p-p)
225 V/μs slew rate for 5 V step (rise)
47 ns settling time to 0.1% for 4 V step
±125 μV and 3.7 μV/°C maximum input offset voltage and drift
100 nA and 250 pA/°C maximum input offset current and drift
Low distortion (HD2/HD3), VS = ±5 V, VOUT = 2 V p-p
−141 dBc/−144 dBc at 1 kHz
−112 dBc/−115 dBc at 100 kHz
−95 dBc/−79 dBc at 1 MHz
Low power operation
1.0 mA quiescent supply current per amplifier at ±5 V
Dynamic power scaling
Fully specified at +3 V, +5 V, and ±5 V supplies
Rail-to-rail inputs and outputs
APPLICATIONS
High resolution analog-to-digital converter (ADC) drivers
Portable and battery-powered instruments and systems
High component density data acquisition systems
Audio signal conditioning
Active filters
GENERAL DESCRIPTION
The ADA4807-1 (single), ADA4807-2 (dual), and ADA4807-4
(quad) are low noise, rail-to-rail input and output, voltage
feedback amplifiers. These amplifiers combine low power, low
noise, high speed, and dc precision to provide an attractive
solution for a wide range of applications from high resolution
data acquisition instrumentation to high performance battery-
powered and high component density systems where power
consumption is of key importance.
With only 1.0 mA of supply current per amplifier, the ADA4807-1/
ADA4807-2/ADA4807-4 feature the lowest input voltage noise
among high speed, rail-to-rail input/output amplifiers in the
industry and offer a wide bandwidth, high slew rate, fast settling
time, and excellent distortion performance. Additionally, these
amplifiers offer very low input offset voltage and drift performance,
making them ideal for driving multiplexed and high throughput
precision 16-/18-bit successive approximation registers (SARs)
and 24-bit - ADCs.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
PIN CONNECTION DIAGRAMS
VOUT 1
6 +VS
–VS 2
5 DISABLE
+IN 3
4 –IN
Figure 1. 6-Lead SC70 and 6-Lead SOT-23 Pin Configuration (ADA4807-1)
VOUT1 1
–IN1 2
+IN1 3
–VS 4
8 +VS
7 VOUT2
6 –IN2
5 +IN2
Figure 2. 8-Lead MSOP Pin Configuration (ADA4807-2)
VOUT1 1
–IN1 2
+IN1 3
–VS 4
DISABLE1 5
10 +VS
9 VOUT2
8 –IN2
7 +IN2
6 DISABLE2
Figure 3. 10-Lead LFCSP Pin Configuration (ADA4807-2)
VOUT1 1
–IN1 2
14 VOUT4
13 –IN4
+IN1 3
12 +IN4
+VS 4 ADA4807-4 11 –VS
+IN2 5
10 +IN3
–IN2 6
9 –IN3
VOUT2 7
8 VOUT3
Figure 4. 14-Lead TSSOP Pin Configuration (ADA4807-4)
These amplifiers are fully specified at +3 V, +5 V, and ±5 V supplies
and can operate over the industrial −40°C to +125°C
temperature range.
The ADA4807-1 is available in 6-lead SOT-23 and space-saving
6-lead SC70 packages. The ADA4807-2 is available in an 8-lead
MSOP and a compact, 3 mm × 3 mm, 10-lead LFCSP. The
ADA4807-4 is available in a 14-lead TSSOP package.
Table 1. Other Rail-to-Rail Amplifiers
Device
Slew
Bandwidth Rate
(MHz)
(V/μs)
AD8031/AD8032 80
35
AD8027/AD8028 190
90
AD8029/AD8030/
AD8040
125
62
Voltage
Noise
(nV/√Hz)
15
4.3
16.5
Max.
VOS
(mV)
±1.5
0.8
5
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
|
| |
 
Data Sheet
ADA4807-1/ADA4807-2/ADA4807-4
5 V SUPPLY
TA = 25°C, VS = 5 V, RLOAD = 1 kΩ to midsupply, RF = 0 Ω, G = +1, 0 V ≤ VICM ≤ +VS − 1.5 V, unless otherwise noted.
Table 3.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth
Slew Rate
Settling Time to 0.1%
DISTORTION/NOISE PERFORMANCE
Second Harmonic (HD2)
Third Harmonic (HD3)
Peak-to-Peak Noise
Input Voltage Noise
Input Voltage Noise 1/f Corner
Input Current Noise
Input Current Noise 1/f Corner
DC PERFORMANCE
Input Offset Voltage
0 V ≤ VICM ≤ +VS − 1.5 V
+VS − 1.5 V ≤ VICM ≤ +VS
Input Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Offset Current
Input Offset Current Drift
Open-Loop Gain
INPUT CHARACTERISTICS
Common-Mode Input Resistance
Differential Input Resistance
Common-Mode Input Capacitance
Differential Input Capacitance
Input Common-Mode Voltage Range
CMRR
Test Conditions/Comments
G = +1, VOUT = 20 mV p-p
G = +1, VOUT = 2 V p-p
G = +1, VOUT = 2 V step, 20% to 80%, rise/fall
G = +1, VOUT = 2 V step
fC = 1 kHz, VOUT = 2 V p-p
fC = 100 kHz, VOUT = 2 V p-p
fC = 1 MHz, VOUT = 2 V p-p, ADA4807-1
fC = 1 MHz, VOUT = 2 V p-p, ADA4807-2,
ADA4807-4
fC = 1 kHz, VOUT = 2 V p-p
fC = 100 kHz, VOUT = 2 V p-p
fC = 1 MHz, VOUT = 2 V p-p
f = 0.1 Hz to 10 Hz
f = 100 kHz
f = 1 kHz
f = 10 Hz
f = 100 kHz
f = 10 Hz
ADA4807-1, ADA4807-2
ADA4807-4
ADA4807-1, ADA4807-2
ADA4807-4
0 V ≤ VICM ≤ +VS − 1.2 V, TMIN to TMAX
0 V ≤ VICM ≤ +VS − 1.5 V
+VS − 1.5 V ≤ VICM ≤ +VS
0 V ≤ VICM ≤ +VS − 1.2 V, TMIN to TMAX
0 V ≤ VICM ≤ +VS − 1.5 V
+VS − 1.5 V ≤ VICM ≤ +VS
0 V ≤ VICM ≤ +VS − 1.2 V, TMIN to TMAX
VICM = 1 V to 3 V
Min
−125
−175
−720
−850
113
−VS − 0.2
96
Typ
170
28
145/160
40
−141
−111
−93
−83
−153
−115
−78
160
3.1
3.3
5.8
29
0.7
10
2
±20
±20
±110
±110
0.7
−1.2
500
2.6
8
25
30
130
45
35
1
1
110
Max
+125
+175
+720
+850
3.7
−2.0
1000
3.8
100
150
250
+VS + 0.2
Unit
MHz
MHz
V/μs
ns
dBc
dBc
dBc
dBc
dBc
dBc
dBc
nV p-p
nV/√Hz
nV/√Hz
nV/√Hz
Hz
pA/√Hz
pA/√Hz
kHz
μV
μV
μV
μV
μV/°C
μA
nA
nA/°C
nA
nA
pA/°C
dB
MΩ
kΩ
pF
pF
V
dB
Rev. B | Page 5 of 33
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ADA4807-2 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ ADA4807-2.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| ADA4807-1 | The function is Rail-to-Rail Input/Output Amplifiers. Analog Devices | |
| ADA4807-2 | The function is Rail-to-Rail Input/Output Amplifiers. Analog Devices | |
| ADA4807-4 | The function is Rail-to-Rail Input/Output Amplifiers. Analog Devices | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ADA4
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||