|
|
Número de pieza | CLAA070VA01 | |
Descripción | TFT LCD | |
Fabricantes | CHUNGHWA PICTURE TUBES | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CLAA070VA01 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! ACCEPTED BY :
1 page 37 vss Ground
38
DCLK
Data Clock
39 vss Ground
40 vss Ground
- -.
.
.
4111
CLAA070VAO1 V2 spec. 0602
5 Page (5) Please pay attention to displaying the same pattern for very long time. Image might stick on
LCD. If then, time going on can make LCD work well.
(6) Please obey the same caution descriptions as ones that need to pay attention to ordinary
electronic parts.
(C) PRECAUTIONS WITHELECTROSTATICS
(1) This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to
be affected by electrostatics. Please be careful with electrostatics by the way of your body
connecting to the ground and so on.
(2) Please remove protection film very slowly on the surface of LCD module to prevent from
electrostatics occurrence.
(D) STORAGE PRECAUTIONS
(1) When you store LCDs for a long time, it is recommended to keep the temperature between
0°C-40°C without the exposure of sunlight and to keep the humidity less than 90%RH.
(2) Please do not leave the LCDs in the environment of high humidity and high temperature
such as 60°C 90%RH.
(3) Please do not leave the LCDs in the environment of low temperature; below -20°C.
(E) SAFETY PRECAUTIONS
(1) When you waste LCDS, it is recommended to crush damaged or unnecessary LCDs into
pieces and wash them off with solvents such as acetone and ethanol, which should later be
burned.
(2) If any liquid leaks out of a damaged-glass cell and comes in contact with the hands, wash off
throughly with soap and water.
(F) OTHERS
(1) A strong incident light into LCD panel might cause display characteristics' changing inferior
because of polarizer film, color filter, and other materials becoming inferior. Please do not
expose LCD module direct sunlight Land strong UV rays.
(2) Please pay attention to a panel side of LCD module not to contact with other materials in
preserving it alone.
(3) For the. packaging box, please pay attention to the followings:
(3.1) Packaging box and inner case for LCD are designed to protect the LCDs fiom the
damage or scratching during transportation. Please do not open except picking LCDs
up from the box.
(3.2) Please do not pile them up more than 5 boxes. (They are not designed so.) And please
do not turn over.
(3.3) Please handle packaging box with care not to give them sudden shock and vibrations.
And also please do not throw them up.
(3.4) Packing box and inner case for LCDs are made of cardboard. So please pay attention
not to get them wet. (Such like keeping them in high humidity or wet place can occur
getting them wet.)
- - .-. . - - d m
11/11
CLAA070VA01 V2 spec. 0602
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet CLAA070VA01.PDF ] |
Número de pieza | Descripción | Fabricantes |
CLAA070VA01 | TFT LCD | CHUNGHWA PICTURE TUBES |
CLAA070VA02 | Display Module | CHUNGHWA PICTURE TUBES |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |