DataSheet.es    


PDF AD8033 Data sheet ( Hoja de datos )

Número de pieza AD8033
Descripción Op Amps
Fabricantes Analog Devices 
Logotipo Analog Devices Logotipo



Hay una vista previa y un enlace de descarga de AD8033 (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! AD8033 Hoja de datos, Descripción, Manual

FEATURES
FET input amplifier
1 pA typical input bias current
Very low cost
High speed
80 MHz, −3 dB bandwidth (G = +1)
80 V/μs slew rate (G = +2)
Low noise
11 nV/√Hz (f = 100 kHz)
0.7 fA/√Hz (f = 100 kHz)
Wide supply voltage range: 5 V to 24 V
Low offset voltage: 1 mV typical
Single-supply and rail-to-rail output
High common-mode rejection ratio: −100 dB
Low power: 3.3 mA/amplifier typical supply current
No phase reversal
Small packaging: 8-lead SOIC, 8-lead SOT-23, and 5-lead SC70
APPLICATIONS
Instrumentation
Filters
Level shifting
Buffering
GENERAL DESCRIPTION
The AD8033/AD8034 FastFET™ amplifiers are voltage feedback
amplifiers with FET inputs, offering ease of use and excellent
performance. The AD8033 is a single amplifier and the AD8034
is a dual amplifier. The AD8033/AD8034 FastFET op amps in
Analog Devices, Inc., proprietary XFCB process offer significant
performance improvements over other low cost FET amps, such
as low noise (11 nV/√Hz and 0.7 fA/√Hz) and high speed (80 MHz
bandwidth and 80 V/μs slew rate).
With a wide supply voltage range from 5 V to 24 V and fully
operational on a single supply, the AD8033/AD8034 amplifiers
work in more applications than similarly priced FET input
amplifiers. In addition, the AD8033/AD8034 have rail-to-rail
outputs for added versatility.
Despite their low cost, the amplifiers provide excellent overall
performance. They offer a high common-mode rejection of
−100 dB, low input offset voltage of 2 mV maximum, and low
noise of 11 nV/√Hz.
Low Cost, 80 MHz
FastFET Op Amps
AD8033/AD8034
CONNECTION DIAGRAMS
NC 1
–IN 2
+IN 3
–VS 4
AD8033
8 NC
7 +VS
6 VOUT
5 NC
NC = NO CONNECT
Figure 1. 8-Lead SOIC (R)
VOUT 1
–VS 2
+IN 3
AD8033
5 +VS
4 –IN
Figure 2. 5-Lead SC70 (KS)
VOUT1 1
–IN1 2
+IN1 3
–VS 4 AD8034
8 +VS
7 VOUT2
6 –IN2
5 +IN2
Figure 3. 8-Lead SOIC (R) and 8-Lead SOT-23 (RJ)
24
21 G = +10
18
15 G = +5
12
9
G = +2
6
3
0
–3
–6
–9
0.1
1
VOUT = 200mV p-p
G = +1
G = –1
10
FREQUENCY (MHz)
100
1000
Figure 4. Small Signal Frequency Response
The AD8033/AD8034 amplifiers only draw 3.3 mA/amplifier of
quiescent current while having the capability of delivering up to
40 mA of load current.
The AD8033 is available in a small package 8-lead SOIC and a
small package 5-lead SC70. The AD8034 is also available in a
small package 8-lead SOIC and a small package 8-lead SOT-23.
They are rated to work over the industrial temperature range of
−40°C to +85°C without a premium over commercial grade
products.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2002–2008 Analog Devices, Inc. All rights reserved.

1 page




AD8033 pdf
TA = 25°C, VS = ±12 V, RL = 1 kΩ, gain = +2, unless otherwise noted.
Table 3.
Parameter
DYNAMIC PERFORMANCE
−3 dB Bandwidth
Input Overdrive Recovery Time
Output Overdrive Recovery Time
Slew Rate (25% to 75%)
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Distortion
Second Harmonic
Third Harmonic
Crosstalk, Output to Output
Input Voltage Noise
Input Current Noise
DC PERFORMANCE
Input Offset Voltage
Input Offset Voltage Match
Input Offset Voltage Drift
Input Bias Current
Open-Loop Gain
INPUT CHARACTERISTICS
Common-Mode Input Impedance
Differential Input Impedance
Input Common-Mode Voltage Range
FET Input Range
Common-Mode Rejection Ratio
OUTPUT CHARACTERISTICS
Output Voltage Swing
Output Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Operating Range
Quiescent Current per Amplifier
Power Supply Rejection Ratio
Conditions
G = +1, VOUT = 0.2 V p-p
G = +2, VOUT = 0.2 V p-p
G = +2, VOUT = 2 V p-p
−13 V to +13 V input
−6.5 V to +6.5 V input, G = +2
G = +2, VOUT = 4 V step
G = +2, VOUT = 2 V step
G = +2, VOUT = 10 V step
fC = 1 MHz, VOUT = 2 V p-p
RL = 500 Ω
RL = 1 kΩ
RL = 500 Ω
RL = 1 kΩ
f = 1 MHz, G = +2
f = 100 kHz
f = 100 kHz
VCM = 0 V
TMIN − TMAX
TMIN − TMAX
VOUT = ±8 V
VCM = ±5 V
30% overshoot, G = +1
VS = ±2 V
AD8033/AD8034
Min Typ
65 80
30
21
100
100
55 80
90
225
Max Unit
MHz
MHz
MHz
ns
ns
V/μs
ns
ns
−80 dBc
−82 dBc
−70 dBc
−82 dBc
−86 dB
11 nV/√Hz
0.7 fA/√Hz
1
4
2
50
88 96
2 mV
3.5 mV
2.5 mV
24 μV/°C
12 pA
pA
dB
1000||2.3
1000||1.7
GΩ||pF
GΩ||pF
−12.0 to +9.0
−92 −100
V
dB
±11.52
±11.84
60
35
V
mA
pF
5
3.3
−85 −100
24 V
3.5 mA
dB
Rev. D | Page 5 of 24

5 Page





AD8033 arduino
VIN = 1V
VOUT – 2VIN
t=0
+0.1%
–0.1%
2mV/DIV
1.5µs/DIV
Figure 30. Long-Term Settling Time
0
–5
–10
–Ib
–15
–20
+Ib
–25
–30
–35
–40
20 25 30 35 40 45 50 55 60 65 70 75 80 85
TEMPERATURE (°C)
Figure 31. Ib vs. Temperature
BJT INPUT RANGE
42
36
30
24
–Ib
18
12
+Ib
6
0
10 FET INPUT RANGE
5
+Ib
0
–5
–10
–Ib
–15
–20
–25
–30
–12 –10 –8 –6 –4 –2 0 2 4 6 8
COMMON-MODE VOLTAGE (V)
10 12
Figure 32. Ib vs. Common-Mode Voltage Range
AD8033/AD8034
t=0
VIN = 1V
VOUT – 2VIN
+0.1%
–0.1%
2mV/DIV
20ns/DIV
Figure 33. 0.1% Short-Term Settling Time
7.0
6.9
6.8
6.7
6.6
6.5
6.4
6.3
6.2
6.1
6.0
5.9
–40
–20
VS = ±12V
VS = ±5V
VS = +5V
0 20 40 60 80
TEMPERATURE (°C)
Figure 34. Quiescent Supply Current vs. Temperature for Various Supply
Voltages
4.0
3.5
VS = ±12V
3.0
2.5
2.0
1.5
1.0
VS = ±5V VS = +5V
0.5
0
–0.5
–1.0
–14 –12 –10 –8 –6 –4 –2 0 2 4 6 8
COMMON-MODE VOLTAGE (V)
10 12 14
Figure 35. Input Offset Voltage vs. Common-Mode Voltage
Rev. D | Page 11 of 24

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet AD8033.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AD8030High Speed Rail-to-Rail Input / Output AmplifierAnalog Devices
Analog Devices
AD8031Rail-to-Rail I/O AmplifiersAnalog Devices
Analog Devices
AD8032Rail-to-Rail I/O AmplifiersAnalog Devices
Analog Devices
AD8033Op AmpsAnalog Devices
Analog Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar