Datenblatt-pdf.com


ADG419-EP Schematic ( PDF Datasheet ) - Analog Devices

Teilenummer ADG419-EP
Beschreibung LC2MOS Precision Analog Switch
Hersteller Analog Devices
Logo Analog Devices Logo 




Gesamt 12 Seiten
ADG419-EP Datasheet, Funktion
FEATURES
44 V supply maximum ratings
VSS to VDD analog signal range
Low on resistance: <35 Ω
Ultralow power dissipation: <35 μW
Fast transition time: 145 ns maximum
Break-before-make switching action
Plug-in replacement for DG419
Supports defense and aerospace applications
(AQEC standard)
Military temperature range: −55°C to +125°C
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Enhanced product change notification
Qualification data available on request
APPLICATIONS
Precision test equipment
Precision instrumentation
Battery-powered systems
Sample-and-hold systems
GENERAL DESCRIPTION
The ADG419-EP is a monolithic CMOS SPDT switch. This
switch is fabricated on an enhanced LC2MOS process that
provides low power dissipation yet gives high switching speed,
low on resistance, and low leakage current.
The on resistance profile of the ADG419-EP is very flat over
the full analog input range, ensuring excellent linearity and low
distortion. The part also exhibits high switching speed and high
signal bandwidth. CMOS construction ensures ultralow power
dissipation, making the part ideally suited for portable and
battery-powered instruments.
Each switch of the ADG419-EP conducts equally well in both
directions when on and has an input signal range that extends to
the supplies. In the off condition, signal levels up to the supplies
are blocked. The ADG419-EP exhibits break-before-make
switching action.
Full details about this enhanced product are available in the
ADG419 data sheet, which should be consulted in conjunction
with this data sheet.
LC2MOS Precision
Analog Switch in MSOP
ADG419-EP
FUNCTIONAL BLOCK DIAGRAM
D S2
S1
IN
ADG419-EP
SWITCH SHOWN FOR A
LOGIC 1 INPUT.
Figure 1.
PRODUCT HIGHLIGHTS
1. Extended Signal Range.
The ADG419-EP is fabricated on an enhanced LC2MOS
process, giving an increased signal range that extends to
the supply rails.
2. Ultralow Power Dissipation.
3. Low RON.
4. Single-Supply Operation.
For applications where the analog signal is unipolar, the
ADG419-EP can be operated from a single rail power supply.
The part is fully specified with a single 12 V power supply
and remains functional with single supplies as low as 5 V.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.






ADG419-EP Datasheet, Funktion
ADG419-EP
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
D1
8 S2
S1 2 ADG419-EP 7 VSS
GND 3
TOP VIEW
(Not to Scale)
6 IN
VDD 4
5 VL
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
Mnemonic Description
1D
Drain Terminal. Can be an input or an output.
2 S1
Source Terminal. Can be an input or an output.
3 GND Ground Reference (0 V).
4 VDD
Most Positive Power Supply Potential.
5 VL
Logic Power Supply (5 V).
6 IN
Logic Control Input.
7 VSS
Most Negative Power Supply Potential in Dual-Supply Applications. In single-supply applications, this pin
can be connected to GND.
8 S2
Source Terminal. Can be an input or an output.
Table 5. Truth Table
Logic
0
1
Switch 1
On
Off
Switch 2
Off
On
Rev. 0 | Page 6 of 12

6 Page









ADG419-EP pdf, datenblatt
ADG419-EP
NOTES
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08846-0-7/10(0)
Rev. 0 | Page 12 of 12

12 Page





SeitenGesamt 12 Seiten
PDF Download[ ADG419-EP Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ADG419-EPLC2MOS Precision Analog SwitchAnalog Devices
Analog Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche