|
|
Número de pieza | EPL3314-222ML | |
Descripción | Shielded Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EPL3314-222ML (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 633-1
Shielded PowerInductors– EPL3314
• Small footprint, very low profile shielded power inductor
• Extremely low DCR, Isat ratings as high as 2.3 A
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin
over nickel over silver-platinum. Other terminations available at ad-
ditional cost.
Weight 53 – 60 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 12 mm wide,
0.20 mm thick, 8 mm pocket spacing, 1.55 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
EPL3314-102ML_ 1.0
EPL3314-222ML_ 2.2
EPL3314-332ML_ 3.3
EPL3314-472ML_ 4.7
EPL3314-822ML_ 8.2
EPL3314-103ML_ 10
EPL3314-153ML_ 15
EPL3314-473ML_ 47
DCR (Ohms)3
nom max
SRF typ4 Isat (A)5
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise 40°C rise
0.052 0.060
0.082 0.094
0.116 0.133
0.139 0.160
0.252 0.290
125
80
60
52
37
1.1 1.8 2.3
0.70 1.2 1.6
0.60 1.0 1.4
0.55 0.87 1.2
0.35 0.58 0.82
1.9 2.5
1.5 2.0
1.3 1.7
1.2 1.6
0.84 1.1
0.313 0.360
0.408 0.469
1.087 1.246
35 0.32 0.56 0.77
25 0.27 0.47 0.66
12.5 0.16 0.24 0.35
0.78 1.0
0.67 0.89
0.40 0.53
1. When ordering, please specify packaging code:
EPL3314-473MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 633-1 Revised 09/08/15
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet EPL3314-222ML.PDF ] |
Número de pieza | Descripción | Fabricantes |
EPL3314-222ML | Shielded Power Inductors | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |