EPL3010-102ML Datasheet PDF - Coilcraft
| Part Number | EPL3010-102ML | |
| Description | Shielded Power Inductors | |
| Manufacturers | Coilcraft | |
| Logo |  |
|
|
There is a preview and EPL3010-102ML download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
Document 615-1
Shielded Power Inductors – EPL3010
• Low profile shielded power inductors, 3 × 3 × 1 mm
• Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A
Designer’s Kit C431 contains 5 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight 32 – 38 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide,
0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2 DCR nom3 DCR max3 SRF typ4 Isat (A)5
±20% (µH)
(Ohms)
(Ohms)
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise 40°C rise
EPL3010-301ML_ 0.30 0.040 0.045 249
EPL3010-102ML_ 1.0 0.071 0.078 151
EPL3010-152ML_ 1.5 0.086 0.095 116
EPL3010-222ML_ 2.2 0.137 0.150 98
EPL3010-472ML_ 4.7 0.278 0.306 60
1.0 1.6 2.2
0.80 1.3 1.8
0.68 1.1 1.6
0.54 0.92 1.3
0.36 0.61 0.80
1.7 2.2
1.2 1.7
1.2 1.6
0.98 1.3
0.74 0.99
EPL3010-103ML_ 10
EPL3010-223ML_ 22
0.573 0.631 38 0.20 0.34 0.48
1.25 1.38 27 0.18 0.30 0.42
0.52 0.70
0.35 0.47
1. When ordering, please specify packaging code:
EPL3010-103MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 615-1 Revised 09/08/15
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for EPL3010-102ML electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ EPL3010-102ML.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| EPL3010-102ML | The function is Shielded Power Inductors. Coilcraft | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
EPL3
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||