|
|
Número de pieza | VS1103 | |
Descripción | Module | |
Fabricantes | VLSI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de VS1103 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
No Preview Available ! VS1103 Module
VS1103 Module
Features
Description
• Plays audio from µSD card
• Plays audio from SPI Flash (separate
firmware)
• Plays MIDI and WAV (PCM, IMA ADPCM)
• Firmware and content can be customized
• Controlled via SPI (µSD) or UART (SPI
FLASH)
• High-performance CD-quality analog out
• Supports various sample rates
• Operates from a single supply (VCC=4.0
to 6.0 V)
(Note: IO pins are not 5 V-tolerant. Do
not drive them over 3.6 V!)
• Line output
• Headphone output
• Line input
• Microphone input
• SPI FLASH for code and/or audio data
storage
• µSD connector for large audio data stor-
age
• The most useful signals are routed to
pin headers for easy access and cus-
tomization
Applications
The VS1103 Module is a small, low-cost, high-
performance, easy-to-use audio player that is
controlled from serial control interface (when
playing from µSD card) or an UART (when
playing from SPI FLASH). It can be used as
a “plug-in” audio board in electronic systems
or as a standalone small audio player.
The product is supported by design services,
audio content preparation and pre-programming.
It is also fully configurable by the user by us-
ing free Integrated Development Tools (VSIDE)
for the VS1103 IC. The use of the module
does not require any advanced information
from the user.
Pin headers of the PCB are compatible with
DIL32 footprint 2.54 pitch 15.24 mm wide (100
mils pitch, 600 mils wide). This makes it pos-
sibe to use standard DIL32 ZIF sockets or
solder it by using DIL32 footprint.
The left row of the PCB has digital connec-
tions for SPI control or other circuitry. The
right row has power connections, analog con-
nections and a serial port. These can be
used to interface the board with a PC and
VSIDE or a host microcontroller.
• Elevators
• Ticket machines
• Audio user’s manuals
• Vending machines
• Car accessories
• Alarm systems
• PC accessories
• Speaking hi-tech toys
• Development board for VS1103 chip
The VS1103 Module operates from a single
power supply. The board has either 2MBytes
(VSMD301) or 16MBytes (VSMD321) of on-
board FLASH and a µSD card connector for
audio content. The module boots from the
on-board FLASH memory.
Version: 0.52, 2015-05-13
1
1 page VS1103 Module
3 PLACEMENT AND PINOUT
3 Placement and Pinout
Figure 1: Pinout.
Pin Name
Description
Pin Name
Description
1 XRESET
Active Low reset, 100KΩ
pull-up
32 VCC
Power supply voltage
4.0V - 6.0V
2 ENA_CVDD Core voltage regulator en- 31 DVDD
able, 100KΩ pull-up
DVDD output of 3.3V, for
external circuitry
3 ENA_DVDD IO voltage regulator en- 30 CVDD
CVDD output of 2.7V, for
able, 100KΩ pull-up
external circuitry
4 DC_MEAS 1 DC input to ADC
29 LINE_IN 1 LINE input with DC block
5 SO
6 SI
7 SCLK
SCI data output
SCI / SDI data input
SCI / SDI data clock
28 GND
27 LOUT
Ground, connected to the
ground plane
Left channel line out
8 XDCS
SDI chip select, 100KΩ
pull-up
26 ROUT
(AC-coupled)
Right channel line out
9 VCO
10 XCS
11 CS2
12 CS1
13 SDCK
14 MISO
15 SDCD
Optional clock output
SCI chip select, 100KΩ
pull-up
µSD chip select, GPIO1,
100KΩ pull-up
SPI FLASH chip select,
GPIO0, 10KΩ pull-up
CLK for µSD, GPIO3,
100KΩ pull-down
Data out from SPI FLASH
and µSD, GPIO2, 100KΩ
pull-down, 10KΩ to CS1 2
SD card detect, 100KΩ
pull-up
25 GBUF
24 LHP
23 RHP
22 GND
21 MICN
20 MICP
19 RX
18 TX
(AC-coupled)
Headphone 1.2 V com-
mon output (note DC-bias)
Headphone left channel
output (note DC-bias)
Headphone right channel
output (note DC-bias)
Ground, connected to the
ground plane
MIC input negative
MIC input positive
Serial port receive, diode,
10KΩ pullup, 5V tolerant
Serial port transmit
16 GND
Ground, connected to the
ground plane
17 MOSI
Data in for µSD and SPI
FLASH, DREQ
1 DC_MEAS and LINE_IN use the same ADC input, so connect only one.
2 Due to the resistor between CS1 and MISO, MISO gets a pull-up during µSD access and a
pull-down during boot from SPI FLASH.
Note: The maximum voltage for IO pins (except RX) is 3.6V ! Only VCC can be 4.0 V -
6.0 V.
Version: 0.52, 2015-05-13
5
5 Page VS1103 Module
7 PCB SCHEMATICS
7 PCB Schematics
Figure 6: Schematic of the VS1103 Module.
Version: 0.52, 2015-05-13
11
11 Page |
Páginas | Total 25 Páginas | |
PDF Descargar | [ Datasheet VS1103.PDF ] |
Número de pieza | Descripción | Fabricantes |
VS1103 | Module | VLSI |
VS1103b | MIDI/ADPCM AUDIO CODEC | VLSI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |