Datenblatt-pdf.com

3.0SMCJ10A Schematic ( Datenblatt PDF ) - Taiwan Semiconductor

Teilenummer 3.0SMCJ10A
Beschreibung Surface Mount Transient Voltage Suppressor
Hersteller Taiwan Semiconductor
Logo Taiwan Semiconductor Logo 

Gesamt 4 Seiten
		
3.0SMCJ10A Datasheet, Funktion
3.0SMCJ SERIES
Surface Mount Transient Voltage Suppressor
Features
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to
BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
3000 watts peak pulse power capability with a 10 X 1000 us
waveform by 0.01% duty cycle
Voltage Range
5.0 to 170 Volts
3000 Watts Peak Power
SMC/DO-214AB
.129(3.27)
.118(3.0)
.245(6.22)
.220(5.59)
.103(2.62)
.079(2.00)
.280(7.11)
.260(6.60)
.012(.31)
.006(.15)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 16mm tape (EIA STD RS-481)
Weight: 0.21gram
.060(1.52)
.030(0.76)
.008(.20)
.004(.10)
.320(8.13)
.305(7.75)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC, Tp=1ms
(Note 1)
Symbol
PPK
Value
Minimum 3000
Units
Watts
Steady State Power Dissipation
Pd 5 Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
200 Amps
Maximum Instantaneous Forward Voltage at
100.0A for Unidirectional Only (Note 4)
VF
3.5 / 5.0
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 150
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2.
2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal.
Volts
OC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. VF=3.5V on 3.0SMCJ5.0 thru 3.0SMCJ90 Devices and VF=5.0V on 3.0SMCJ100 thru
3.0SMCJ170 Devices.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 3.0SMCJ5.0 through Types 3.0SMCJ170.
2. Electrical Characteristics Apply in Both Directions.
- 612 -


SeitenGesamt 4 Seiten
PDF Download[ 3.0SMCJ10A.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
3.0SMCJ103000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics
3.0SMCJ10SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 3000 Watt Peak Power Pulse)Pan Jit International Inc.
Pan Jit International Inc.
3.0SMCJ10SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170VoltsSurge Components
Surge Components
3.0SMCJ10Surface Mount Transient Voltage SuppressorTaiwan Semiconductor
Taiwan Semiconductor
3.0SMCJ1003000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORSWon-Top Electronics
Won-Top Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com    |   2018   |  Kontakt  |   Suche